TOP 10 best external sound cards: rating, characteristics, reviews and prices in 2022


Updated: 08.11.2021 17:02:20

Expert: Bogdan Shevchuk

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Audio output for headphones or speakers and a microphone input are such integral interfaces of any desktop PC, laptop or wearable gadget that we have long taken it for granted. But these interfaces lead to a very specific device - a sound card. We are also accustomed to the fact that the sound module is most often not discrete, but is completely soldered onto the computer’s motherboard. In its pure form, a sound card is a separate board that is inserted into the corresponding slot on the motherboard. We are talking all this about internal sound cards. And there are also external ones that look and connect like any other peripheral devices. These are exactly what we will be talking about in today’s review from Expertology.

Best Budget Internal Sound Cards

The internal sound card is inserted into a free PCI-E slot, does not take up space on the desk and does not require separate power. Speakers or a headset are connected to the rear wall; connectors can be brought out to the front panel through the header.

Disadvantages - you need a free PCI slot, or even two, the solution is only suitable for desktop cases; you can’t plug it into a laptop.

Competing for the title of “best budget sound card for PC” are ASUS and Creative, the creators of the very first Sound Blaster, head and shoulders above. Price restrictions affected the variety of ports, the quality of chips and the transfer of calculations to the program.

3ASUS Xonar DGX

Functionality 8 Cost 9 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.3 Evaluation

pros

  • Inexpensive upgrade to onboard audio
  • Headphone Amplifier
  • Small card sizes

Minuses

  • Audio effects are software, drivers required
  • Software errors
  • Program setup required

The Taiwanese are targeting Xonar at players - a driver with GX 2.5 effects. The card is low profile (170x64 mm) - it fits in a cheap slim case and plugs into PCI-E.

On the rear panel there is a quartet of mini-jacks: 3 outputs to a 5.1 system, a microphone input in the same jack as a line one, and an optical output. Front connectors can be connected to pins on the card. There is a separate amplifier for headphones, which increases the detail of the sound picture.

The DACs have sufficient bit depth - 24 bits with a frequency of 96 kHz and a good signal-to-noise ratio - 105 dB. The card plays better than the built-in audio, but not fantastic.

2Creative Sound Blaster Audigy Fx

Functionality 7 Cost 10 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • Good price/quality ratio
  • Great headphone amplifier
  • Flexible, convenient program

Minuses

  • No optical output
  • There may be interference from the power supply
  • Low output level

Usually Realtec codecs are built into the motherboard, here the ALC898 sound processor is used for the PCI-E card. A short and low black board (126x70 mm) will fit into any system unit.

Three colored 3.5 mm jacks on the rear hardware are responsible for 5.1 audio output, and another pair are separate microphone and line inputs. Inside there is a high-quality headphone amplifier MAX97220A, capable of driving powerful monitors.

The DAC with typical 24-bit/96 kHz parameters provides a signal/noise level of 106 dB, which is very good. An intelligent control program allows you to configure 3D effects for games (EAX 5.0) and significantly improve the sound of your computer.

1Creative Sound Blaster Audigy Rx

Functionality 9 Cost 7 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.0Rating

pros

  • Good sound to replace the built-in one
  • Detailed sound picture in games
  • High-quality assembly and element base

Minuses

  • Overpayment for gilding and karaoke
  • Not suitable for micro-ATX cases
  • Bad default driver settings

Externally, the PCI-E sound blaster looks amazing - thick black full-profile PCB (139x 110 mm), Japanese capacitors and gold-plated connectors. But the color of the sockets does not differ and the card will not fit into the thin case.

The rear panel is fully occupied - an optical output, 7.1 sound distribution, a line input and two microphones (hello to karaoke fans). The board has a high-quality MAX97220A headphone amplifier.

It is based on the Creative E-MU codec and the Cirrus Logic CS4382-KQZ DAC, which together provide a good signal-to-noise ratio of 106 dB, support for ASIO2.0 (direct access of software to hardware) and EAX 4.0 (effects for games).

When configured correctly, the sound becomes voluminous, and birdsong can be heard in games.

Roland Rubix24

Although the model cannot be called new, this external sound card is one of the best for listening to music. The excellent performance characteristics, build quality and service life of the device are admirable - for several years competitors have not managed to create anything better.

Roland's Rubix24 allows you to quickly and easily process audio at a professional level suitable for musicians and sound engineers. Among the undoubted advantages of the card are its compact dimensions, and the sound quality is comparable to studio recordings. For home use, this is definitely the best choice.

The interface uses two 3/4″ XLR inputs, two balanced TRS outputs, plus a couple more outputs. The sound is clear, practically free of extraneous noise, there are no complaints about the quality of the drivers, the software includes a limiter and compressor function. The use of Loopback technology allows for high-quality control over the routing of the audio signal - streamers will appreciate this quality. The signal delay in both directions does not exceed 3 ms. To connect to an iPad you will need a special adapter. The card does not have a control panel; all controls are located on the device body.

Advantages of the model:

  • quick installation of drivers for Windows OS from “seven” and higher;
  • unsurpassed functionality;
  • minimum time delay of the audio signal;
  • number of outputs increased to 4.

The only serious disadvantage is the cost of the card.

The best internal sound cards in the mid-range segment

The best sound cards for computers in the mid-range segment are also made by ASUS and Creative - these full-profile boards look beautiful, are aimed at gamers and decorators - they have backlighting. There are many more channels and ports, optical outputs and surround sound up to 7.1 are supported. Signal processing is not done in software, but within a separate DSP.

MAYA was also noted here; this card is a semi-professional mixer with microphone and guitar inputs, a monitor channel and fully software control.

3Creative Sound Blaster Zx

Functionality 9 Cost 8 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • Control panel - connectors at hand
  • Versatile sound for games and movies
  • Simple and quick program setup

Minuses

  • Switching headphones/speakers only by software
  • The remote controls the volume of the headphones only
  • Backlight won't turn off

A square-shaped full-profile PCI-E card (125x125 mm) will appeal to modders - black PCB under a red casing, with a chip illuminated by a diode visible in the window.

Two of the five 3.5 mm gold connectors are for microphone and headphones, three are for 5.1 speakers, and there are also two optics - S/PDIF input and Toslink output. The box contains a red and black wired remote control with a volume dial, and paired microphone and headphone jacks (3.5 / 6.3).

The system is built on a Creative CA0132 chip, for the front channels there is a separate CS4398 DAC, there are op-amps at the outputs of the speakers and headphones, the signal-to-noise ratio is at a height of 116 dB.

The card sounds great in games and is suitable for music and movies.

2ASUS Xonar HDAV1.3 Deluxe

Functionality 9 Cost 9 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • AV amplifier 7.1 inexpensive
  • Great surround sound
  • Flexible software settings

Minuses

  • Inconvenient software interface
  • You need to buy good speakers and cables
  • Two cards take up a lot of space in the case

At first glance, the PCI-E card resembles a full-profile video card; the HDMI input and output are visible on the back wall; the microcircuits are covered with a matte black casing. This is partly true - the board with 7.1 sound is a ready-made AV home theater amplifier.

On the back wall there is a pair of analog RCAs, a coaxial digital output and a microphone jack combined with Toslink optics. Separate DAC and ADC for each channel provide 24-bit/192 kHz conversion with a high signal-to-noise ratio of 120 dB.

Multichannel amplifiers did not fit on one PCB; an additional PCI-E card with six RCA outputs for acoustics was needed. Panoramic sound is excellent in games and movies; in good speakers, every rustle can be heard.

Read on the website: Rating of processors by performance

1ESI MAYA44

Functionality 9 Cost 10 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

9.3 Evaluation

pros

  • Mini recording studio for pennies
  • Universal inputs/outputs
  • Visual mixer setup

Minuses

  • Doesn't work well with games
  • Minor bugs in the software
  • Complicated driver setup

The sound card is suitable for beginning musicians; the tall card is inserted into a PCI slot and turns an inexpensive computer into a mixer. The rear plate has four large jacks (6.3 mm) - analog inputs/outputs, as well as digital optical and coaxial inputs. When working with an electret microphone, 48 V phantom power can be supplied, and there is an amplifier for headphones.

The power of the card is revealed in software - the Wolfson WM8776 chip with built-in DAC and ADC (24 bit / 192 kHz) is detected by Windows as three devices, configured in the visual interface, redirecting streams between the microphone, amp, amplifier and monitors.

The sound is live, the conversion quality is between amateur devices and professional instruments.

Phantom power available

The next thing you should pay attention to is the presence of phantom power. If you decide to purchase an audio interface with a built-in microphone preamplifier, then make sure that there is 48 V phantom power. If it is not there, then you will not be able to connect most condenser microphones that require such power for their operation. Although, in other respects, the vast majority of preamplifiers are built into professional sound cards. There is such a function.

Best Premium Internal Sound Cards

Modern games are an excellent testing ground for debugging new technologies, so the first positions in the top sound cards are occupied by devices for games. Again, ASUS and Creative are noticeable here, only the work of the engineers was carried out at a higher level - the boards were thoughtfully designed, shielded, and expensive converters and amplifiers were used for them.

There are no longer enough narrow strips for multi-channel outputs, so daughter cards with optics and RCA have been added.

This limitation is especially noticeable on the RME studio board - the developers had to take a pair of D-SUBs and connect balanced microphone and guitar inputs to pins.

3ASUS Xonar Essence STX II 7.1

Functionality 8 Cost 8 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.3 Evaluation

pros

  • Low distortion
  • High-quality stereo sound for listening to music
  • Excellent build

Minuses

  • Not recommended for gamers
  • Overpriced in Russia
  • Crooked and rarely updated drivers

The second generation of the popular Essense series has received many improvements. The tall PCI-E card is carefully routed to reduce noise, the analog circuits are covered with a gray aluminum shield, film capacitors and expensive Muses op-amps are used. All this allowed us to achieve a steep signal-to-noise ratio of 124 dB with only 0.0003% distortion.

For tuning enthusiasts, the amplifiers are supplied with DIP connectors, and the kit includes replaceable microcircuits and pliers. Of the connectors on the bar, there are 2 output tulips, two 6.3 mm inputs (headphones and microphone), coaxial S/PDID. For 7.1 mode, the kit includes a daughter card with RCA speaker outputs.

Stereo sound is excellent for music, provided you have quality speakers or headphones.

2Creative Sound Blaster ZXR

Functionality 9 Cost 8 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • Great all-around sound
  • Rich program settings
  • Remote control with microphones

Minuses

  • Crowding and heat in the system unit
  • The analog resistor on the remote control will crunch
  • Need a quality power supply

The long and tall PCI-E card is covered with a black screen with red inserts; a red Sound Core 3D chip is visible in the window. On the golden back wall there are large 1/4″ microphone and headphone jacks - a nod to professionals, as well as RCA outputs and 5.1 surround sound mini-jacks.

The complete daughter card will add two tulips and two optics - input and output. The box also contains a wired remote control with a volume control, paired jacks (3.5/6.3) and built-in stereo microphones.

Serious Texas Instruments converters and Mouser operational amplifiers provide a stunning signal-to-noise ratio of 124 dB.

The card is a universal sound card, suitable for games, movies and enjoying music.

1RME HDSPe AIO

Functionality 10 Cost 7 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • One card replaces a rack of equipment
  • Auto sample rate adjustment
  • High sound quality

Minuses

  • Possible interference from the computer
  • No Russification of programs
  • There may be difficulties with installation

A full-profile PCI-E card can hardly be called just an audio card; it is an audio interface that brings together any signal sources in any combination. There are only two optical jacks and a pair of D-SUBs on the metal bar. The 15-pin contacts are converted by cables into balanced analog inputs, professional ADAT, AES/EBU or MIDI interfaces. If necessary, external units are connected, for example, a time synchronizer for recording TV programs.

All ports work simultaneously, the streams are combined by the TotalMix mixer. The ADC is supplied by CS5361, the DAC is AD1852, the bit width is 24 bits, the frequency is 192 kHz - changes automatically. The signal-to-noise ratio reaches 120 dB.

The sound is professional, the board is used in studios.

The best budget external sound cards

The best external sound cards are suitable for outputting music from laptops (to improve the stock sound) or for portable devices like the Raspberry Pi, which do not have expansion slots. Small packages contain an ADC/DAC, sometimes with a simple amplifier, and receive power from a USB port.

The characteristics of the converters are not premium, but they are not required to be high-end.

The rating below shows a card from Creative, as well as a couple of Behringer devices - an inexpensive input for a guitar and an unexpectedly high-quality inexpensive audio system.

3Creative Sound Blaster Play! 3

Functionality 7 Cost 10 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.3 Evaluation

pros

  • Compact dimensions
  • USB Powered
  • Headset compatibility

Minuses

  • Average sound performance
  • Noise when recording from a microphone
  • No recording gain control

A small black box 2 cm wide and 14 cm long is plugged into USB with a flexible wire protruding from the end; on the other hand, there are 3.5 mm jacks for a microphone and headphones (scheme 2.0), you can also plug in a headset with a 4-pin plug.

Hidden inside are a 24-bit/96 kHz DAC and a 24-bit/48 kHz ADC, as well as an amplifier. The design has an average signal-to-noise ratio of 96 dB, other characteristics are also not great, for example, harmonic distortion is 0.132%.

The quality of the device is slightly better than the integrated sound; it is suitable as a headphone amplifier or a path for the Raspberry Pi.

2BEHRINGER U-PHORIA UM2

Functionality 8 Cost 8 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.0Rating

pros

  • Compact replacement for guitar amp
  • Professional connectors
  • Balanced input with phantom power

Minuses

  • Difficulty finding drivers
  • High noise level
  • Map for amateur tasks

Aspiring guitarists and entertainers will appreciate the convenience of this audio interface. The black desktop box plugs into USB and collects signals from two inputs in the computer. Each channel has its own level control (on the cover). An electric guitar is connected to a large 6.3 mm jack, the second combo input (XLR/TRS) is balanced for a pickup or microphone, and 48 V phantom power is supplied to the capacitor system. The result can be listened to through headphones or output via RCA to speakers. The DAC converts signals with a frequency of 48 kHz and 24 bits.

1BEHRINGER U-CONTROL UCA222

Functionality 9 Cost 10 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

9.3 Evaluation

pros

  • Very high quality sound for the price
  • Elementary installation, true plug-and-play
  • ASIO 2.0 protocol support

Minuses

  • The analog volume control rustles
  • Cheap plastic slides on the table
  • For complete perfection, all devices must be coordinated

A red plastic soap dish in size and appearance resembles a player from the 80s (18x14x4 cm). On the left sticks out a USB tail for communication with a PC and power supply, on top there are RCA stereo inputs and outputs, on the bottom there is an optical output, a mini-jack for monitoring and a black volume wheel protruding from the body.

The internal Burr Brown PCM2902E converter does not have a high bit resolution (16 bits), the maximum sampling frequency is 48 kHz. But the ASIO 2.0 protocol is supported for direct operation of programs with hardware, a rare case for a budget solution.

Despite the modest characteristics, the sound of the card is unexpectedly good, without interference or noise.

frequency range

In modern professional audio interfaces, this indicator is also usually fine and there are no major problems. You probably know that the range of audible frequencies for humans is from 20 to 20,000 Hz. Therefore, if the interface has this range or wider, then everything is in order! In fact, what is much more important here is not the frequency range, but the indicator of the unevenness of the frequency response of the sound card. In general, I’ll say right away that a value within +- 0.5 dB is by and large a good indicator.

The best external sound cards in the mid-range segment

The rating of external sound cards for computers continues in the middle price segment. These devices are more functional - they can work as a good sound card (Creative) with the option of digitizing recordings or audio interfaces for an amateur studio or home concerts.

This includes professional connectors, powered microphone inputs, and channels for audio monitoring. The bonus includes software for mixing tracks and support for tablets and smartphones via the same USB port. Professional sound from a tablet? Sounds strong.

3Steinberg UR12

Functionality 9 Cost 10 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

9.3 Evaluation

pros

  • Great card for your home studio
  • Compact heavy body
  • CUBASE program included

Minuses

  • Windows needs to be configured
  • Monitor output for low impedance ears
  • No separate headphone volume control

A simple version of the UR12 external audio interface is housed in a compact case (159x144x46 mm). The appearance is austere, as befits sound equipment - black panels, an aluminum casing with rubber supports.

Balanced XLR input - for connecting a microphone, optional 48 V phantom power is supplied, high-impedance HI-Z input (6.3 mm jack) - for electric guitar. The level is adjusted for each port, and monitor ears are plugged in nearby to hear the result. DAC / ADC - Cirrus Logic CS4270 has good parameters 24 bit / 192 kHz, signal noise is a little high - 87 dB.

The device connects to a PC via USB-D, there are RCA stereo outputs to the amplifier, power comes from a computer or power bank via micro-USB.

2Creative X-Fi HD

Functionality 8 Cost 9 Reliability 8

The overall score is calculated as the average value of the sum of the main parameters.

8.3 Evaluation

pros

  • Ringingly clear sound for gaming
  • Good headphone gain
  • Works with Android via OTG

Minuses

  • Speakers do not work with headphones
  • Legacy mini-USB connector
  • Not an audiophile product

The modest black box looks like a media player; on the front panel there are large headphone and microphone jacks (6.3 mm) and a volume control. There is more choice on the rear wall - RCA line output, optical inputs/outputs, mini-USB for PC and power, as well as a line input signed Phono - the manufacturer offers to connect a record player to it for digitizing recordings.

The Creative CA0189-2AG chip works inside; the converters operate at 24 bit/96 kHz with a decent signal-to-noise ratio of 100 dB. The EAX 4.0 surround sound standard for games is supported.

Reviews from owners indicate that the card sings great, but is better suited for games than for music.

1Focusrite Scarlett 2i2

Functionality 10 Cost 9 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

9.3 Evaluation

pros

  • Nice compact body
  • Separate headphone volume control
  • Studio sound from a media player is priceless

Minuses

  • Doesn't rock headphones well
  • No XLR cable included
  • Minor difficulties with drivers

Street musicians have at their disposal a compact (45x175x100 mm) device that is beautiful and stylish. Red anodized aluminum, high-gloss volume verniers and overload indicator lights. Powered by 5V via USB-D, connects to PC, tablet or media player.

Universal inputs with combined XLR/TRS jacks will pick up sound from a synthesizer, guitar or microphone (there is phantom power), and output to monitors is via large jacks on the rear panel. Finally, the right thing has been done - the headphone volume is adjusted separately from the monitor volume.

ADC/DAC chips - CS4272 process signals with parameters up to 24 bit/192 kHz. The sound is excellent, consistent with an entry-level professional system.

FOCUSRITE Scarlett Solo 3rd Gen

The price is about 10,000 rubles.


FOCUSRITE Scarlett Solo 3rd Gen

The body is made of a strong solid aluminum profile.

The FOCUSRITE Scarlett Solo 3rd Gen sound card is the next update to the popular series of audio interfaces.

Two input connectors: XLR (with the ability to supply +48V phantom power for condenser microphones) and instrument TRS. There is an output for connecting headphones and a three-color indication of signal level and overload. There is also the ability to monitor audio with zero latency. Balanced TRS outputs are located on the back of the case.

AIR mode, which emulates the operation of microphone preamplifiers with a transformer input. AIR mode can be turned on or off.

Connection to a computer is realized using a high-speed USB-C bus. An external power supply is not required, which will be especially convenient when traveling.

The software included is: Avid Pro Tools First, Ableton Live Lite, XLN Audio Addictive Keys, Softube Time and Tone Bundle, Focusrite Red Plug-in Suite.

Mode support44.1, 48, 88.2, 96, 176.4, 192 kHz
Dynamic range111 dBA
Kg+noise<0.0012%

Best premium external sound cards

While supporting traditional PC players, manufacturers seem to have forgotten about the whole army of console players playing RPGs, shooters and stealth quests. But for them, the sound is part of the script and is extremely important for victory.

It’s all the more joyful to meet a new product from the Creative team, which opens the top of sound cards with an external connection - the thing clings to the Play Station or Xbox and generates not only realistic sound in the headphones, but also a three-dimensional panorama - now not a single enemy will pass by.

The remaining pieces of hardware are professional inputs that collect signals from sources under the control of the sound engineer.

3Creative Sound BlasterX G6

Functionality 9 Cost 8 Reliability 9

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • A new level of sound for consoles
  • Top converter
  • Powerful amplifier for any headphones

Minuses

  • Fine tuning for Windows only
  • Gets hot during operation
  • Custom short optical cable

This external sound card is aimed at gamers and can work not only with PCs, but also with consoles. The small case, 70x24x111 mm, weighs 144 g, will not weigh on your pocket or crush your legs.

Ergonomics are top notch - the angular prism is cast in matte metal, between the headphone and microphone jacks there is a ribbed volume knob with RGB backlighting. On the back wall there is a linear input and output, combined with optics, as well as micro-USB. The buttons on the side limit the gain and activate Scout Mode - to better hear the enemy’s steps.

The DAC parameters are simply fantastic - 32 bits with a frequency of up to 384 kHz, distortion - microfractions of a percent. And the amplifiers are assembled using discrete transistors - hello from the High-End world.

2Steinberg UR44

Functionality 9 Cost 7 Reliability 10

The overall score is calculated as the average value of the sum of the main parameters.

8.7 Evaluation

pros

  • Many universal inputs
  • Two monitor ear outputs
  • Separate channel outputs

Minuses

  • Aluminum body rings
  • Minor difficulties setting up drivers
  • Software manufacturer's licensing policy

A steel box with four combi XLR/TRS inputs is suitable for a small musical group and will combine guitar, drums, microphones and a synthesizer into a single track. Each channel has a level control and supplies 48V for condenser microphones. It’s great that there are two monitor outputs - the sound engineer no longer has to share a headphone with the director.

The rear panel has MIDI inputs/outputs (DIN), separate line outputs and master channel, USB-D for computer and external power. Interestingly, the card works with the iPad - it turns out to be a mobile recording studio.

Inside there is a Yamaha YC706A0 processor and high-quality Japanese parts. The sound is professional quality.

Possible connection difficulties

Provided you connect a new device and follow the connection process consistently, according to the instructions, there will be no problems with synchronizing devices. If, however, when testing the device’s performance, a failure occurs, the card does not function, then it is worth checking some points that are often the source of the problem:

  1. If the computer device “does not find” the external card, you must first eliminate the possibility of a malfunction of the USB port. This can be done by reconnecting the device using a known working connector. To do this, you can use another port on your PC or laptop, or check the functionality of the sound card on another computer device.
  2. If the card is recognized by the computer device, but no sound is played, the problem may be caused by incorrectly installed drivers. To fix the problem, you will need to reinstall them again, after which the device should work.
  3. Another reason why the sound may not play is user inattention. Multifunctional cards of an expensive class are equipped with many options and toggle switches that must be activated to start playing sound. Careful study of the instruction manual included with the product will help you figure it out.

The described manipulations, performed carefully and correctly, will help eliminate problems and activate the card, if the problem is not a malfunction of the device itself due to factory defects, which only a service center specialist can determine.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: o-altai@cp9.ru
Для любых предложений по сайту: o-altai@cp9.ru