How to reset Bluetooth speakers to factory settings

4.7/5 — (105 votes)

Bluetooth speakers have become popular among music lovers over the past couple of years, replacing old ones with long wires, and are used with all computers, smartphones, TVs, and tablets. But, despite this popularity, in 75% of cases the device does not detect wireless speakers. In this article we will try to figure out why this happens and how you can fix the problem in two minutes.

A quick way to reset Bluetooth speakers.

Wireless Bluetooth speakers are a modern compact gadget that allows you to listen to music with excellent sound without connecting to an external power source. A Bluetooth speaker uses Bluetooth wireless technology and connects to a smartphone or tablet.

Bluetooth speakers have become widespread due to their small size, the ability to carry the device with you everywhere, high sound quality and independence from wired power supplies.

Sometimes you need to reset your Bluetooth speakers to factory settings. This may be necessary if the device stops working properly or you want to use it with a different system.

We at 1Gai.Ru have studied how to do this for wireless Bluetooth speakers from different manufacturers.

Disassembling the jbl column: step-by-step instructions

Detailed instructions for disassembling the jbl Extreme cylindrical wireless speaker allow it to be used with any speaker model of this brand. Jbl Extreme has a waterproof case and can be connected to Apple or Android gadgets. Disassembly takes place in several stages:

1. Use a spatula to pry the latches and separate the decorative protection from the base;
2. Using a Phillips screwdriver, unscrew the 2 screws from the case;
3. Remove the protection from the case;
4. Unscrew the 3 screws under the lower hinge;
5. Using a spatula, remove the bottom cover from the base;
6. Unscrew the 8 screws holding the support;
7. Carefully remove the holder without touching the charge indication system, which is connected to it by a ring;
8. Unscrew the 2 screws and remove the display system;
9. Unscrew the 4 screws on the right side, remove the right speaker;
10. Unscrew the 4 screws on the left side, remove the left speaker;
11. Disconnect the terminals from the speakers;
12. Remove the side passive speakers using a putty knife;
13. Disconnect the battery clip, made in the form of a clothespin;
14. Take out the battery;
15. Disconnect the amplifier board located underneath from the battery.

The popular jbl Charge speaker, which has a simpler design, is analyzed differently:

1. Carefully remove both rubber pads at the top and bottom;
2. Pry up the decorative mesh around the entire perimeter with a spatula and remove it;
3. Unscrew 6 screws;
4. Pry to open the plastic case with a putty knife;
5. Disconnect the terminals and take out both speakers;
6. Disconnect the card from the battery;
7. Unscrew the 3 screws and take out the battery.

The column is assembled in reverse order. Disassembling jbl using bluetooth helps to distinguish the original version from a fake. They vary in the quality of the speaker's components, from the outer cover material and logo to the speaker's stated and actual power output and build quality.

What is important to know

tampatra/iStock/Getty Images Plus

First, unplug your speakers: Bluetooth menu > (look for speaker name or model number) > look for the “forget device” or “unpair” menu item.

Then perform a reset: hold down a combination of buttons - such as the power button, Bluetooth button or volume button. For the specific buttons used to reset, see the speaker user manual.

There is an alternative if the button combination does not work. Find a button on the speaker body in a small hole labeled “Reset”. Some manufacturers use this method to reset their speakers.

How to put a Bluetooth speaker into pairing mode

iStock

In some cases, you don't need to completely reboot your Bluetooth speaker, but instead force it into pairing mode. Before going into full factory reset mode, we recommend trying the following steps first:

1. Press the Bluetooth logo button to enter pairing mode.

2. Go to your device's Bluetooth menu. On iOS, Mac, and Windows, you can find it in System Preferences. On Android, you'll get to the menu by long pressing the Bluetooth button in the notification bar.

3. Find and select the name or model number of your Bluetooth speaker from the list.

4. If the problem persists after this, then a factory reset may help.

Repair of portable bluetooth speakers

Portable wireless acoustics quickly burst into our lives and replaced tape recorders and players, the reason for this was modern battery technology. A decent mobile speaker can operate for at least 5-6 hours on a single battery charge, while producing high-quality and loud sound despite its compact size. Modern high-capacity rechargeable batteries are used in the entire range of mobile acoustics and are an integral part of mobile devices, thereby complicating the device itself and increasing the number of possible malfunctions. A portable mobile speaker is a simple device from the outside but very complex from the inside, which combines control modules via Bluetooth and Wi-Fi wireless protocols, a complex processor for managing all connections, a primary circuit with a battery power controller, a control module, an FM receiver and an antenna. , Internet connection and high-quality speakers, almost a mini computer. Of course, repair of a portable speaker will be required if one element from the entire set of complex components of which it consists is faulty.

Our company has significantly succeeded in repairing portable speakers because we have been accumulating experience in repairing them since the appearance of this type of equipment on the market. A significant supply of interchangeable elements and parts necessary for quick and correct repair of portable acoustics is very helpful in our work.

Our center carries out any repair of Bluetooth speakers from almost all manufacturers and most often we receive speakers from the following brands: JBL, JBL, Nomi, Nomi, Beats, Bits, Philips, Philips, Harman Kardon, Gemix, Jamix, Divoom, Divom , Sony, Sony, BOSE, Bose, Logitech, Logitech, Marshall, Marshal, Nude Audio, Nude audio, Sanyo, Sanyo, Scosche, Skuch, Xiaomi, Xiaomi, Aulux, Aulux, Monster, Monster, Samsung, Samsung, Bang&Olufsen, Beng and Olifsen, DreamWave, Dream Wave, Razer, Raiser, Panasonic, Panasonic.

The main faults of Wireless PORTABLE SPEAKERS that our engineers encounter:

• The column does not turn on;
• The speaker turns on, there is an indication, but no sound;
• The sound is wheezing or noisy;
• The sound wheezes and disappears at maximum volume;
• The speaker is not charging;
• Water got in;
• The speaker does not work after being dropped or hit;
• The speaker does not pair with the phone.

Whatever the breakdown, a competent specialist will first carry out diagnostics. Diagnostics is the process of identifying a malfunction and its cause, assessing the internal condition of the device, selecting a repair method (with replacement of a part or component restoration), calculating the cost and time of repair. The results of the process are discussed with the customer, and only with his consent the device is restored. Urgent diagnostics of Bluetooth speakers can be carried out any day at 12 Muranovskaya St., or 66 Leningradsky Prospekt. All services are covered by a guarantee.

The cost of repairing a portable Bluetooth speaker will depend on the complexity; there are three types of complexity:

• simple repair - a mechanical problem (a button is broken, a wire is torn off, replacement of the assembly); The average cost of such repairs is 1000-1200 rubles.
• medium level of complexity (restoration work on small areas of the board after moisture or falls, soldering of contact tracks, restoration of a board component); the average cost of such repairs is 1100-1400 rubles
• complex repairs (elimination of a “floating” defect, restoration of large areas after liquid ingress, replacement of main components, replacement of speaker/s). the average cost of such repairs is 1400-1600 rubles

The Nikom Service company is a leader in the field of mobile portable and smart speakers in the North-East Administrative District, the Eastern Administrative District, the ZAO, the Southern Administrative District, the South-Western Administrative District and the Central Administrative District of Moscow; the speaker repair shop is located within walking distance from the station.
metro stations Altufyevo, Bibirevo, Sokol, Airport and Medvedkovo. Also, for the convenience of our clients, our branches operate near metro stations Otradnoye, Teply Stan, Yasenevo, Perovo, Seligerskaya, Verkhniye Likhobory, Vykhino, Novogireevo, Oktyabrskoye Pole, Tushinskaya, Mitinskaya, Belomorskaya, Kolomenskaya, Maryino, Semenovskaya, Izmailovskaya, Polezhaevskaya, Krylatskoye, Kozhukhovskaya, Sokolniki, Babushkinskaya, Petrovsko-Razumovskaya and VDNKh, as well as Khimki and Mytishchi, where you can leave your portable acoustics for diagnostics. We will definitely try to help you and bring your column back to life! In cases where you don’t have any time to travel, you can call a courier to your home, who will deliver your equipment for urgent repairs. If your portable speakers start to sound worse or won’t turn on at all, contact us! Our customers receive high-quality service, affordable repair prices and prompt order execution. You can get any advice using our contact numbers, call!

Some recommendations for using mobile Bluetooth speakers:

• Do not let the speaker with the charging cable connected to it fall;
• Do not store the speaker with a discharged battery;
• try not to leave the speaker in the rain;
• do not leave the column near heating devices;
• do not leave the speaker in direct sunlight;
• Protect audio speakers from damage from sharp objects;
• do not dirty the column control buttons;

Most users of wireless portable acoustics, after the latter breaks down, are inclined to buy a new one, assuming that the new equipment will work for a long time and will never break. But often with the development of the range of equipment and the increase in the number of manufacturers, the quality of new equipment leaves much to be desired. Many modern electronics manufacturers are trying to cut costs and optimize production, so the quality of materials and software often suffers.

Repairing Bluetooth speakers and other portable acoustics is always cheaper than buying a new one!

1) when repairing equipment, you pay a third or even a quarter of the cost of a new one 2) repaired equipment lasts a long time, because
weak elements have already been replaced 3) owners often get used to their equipment, there is no need to learn a new one 4) new equipment has become much more expensive (2 times) recently 5) you always have time to buy a new one, repair the old one - it’s still good Bring your acoustics for repair, We will definitely try to help you! We will give your equipment a second life!

Repair of bluetooth speakers in Mytishchi:

Mytishchi is a developing satellite city of Moscow with a population of 220,000 people.
where many families have a portable Bluetooth speaker, of course, the service for repairing Bluetooth speakers in Mytishchi is more than relevant today. For residents of Mytishchi, there are several branches in all districts of the city, where you can leave your wireless speaker for diagnostics and carry out high-quality repairs with a guarantee. The addresses of workshops for repairing portable Bluetooth speakers in Mytishchi can be found by phone; our specialists will make every effort and try to help you and bring your irreplaceable device back to life! If you did not see the manufacturer of your device, this means that we simply did not have time to add it to the site. Please call us, we will definitely be able to repair it, because... All Bluetooth speakers have similar circuitry and typical faults.

How to Factory Reset a Bluetooth Speaker

iStock

Almost all Bluetooth speakers have a means of performing a full factory reset, which erases all of the speaker's connections to Bluetooth devices. This allows you to "start from scratch" with your speakers as if you had just taken them out of the shipping box.

It is better to first “forget” or “unpair” the speaker with all devices. You can do this by going to the Bluetooth menu as above, finding the speaker name or model number and selecting the unpair option.

Now you're ready to reset your speaker to factory settings. Most often, a factory reset is a button in a small recess on the case, clearly marked “Reset”. You need to use a pencil or any sharp and thin object that is convenient to reach the button and press to force a reset.

If this hole does not exist, then there is a combination of buttons that you need to hold down at the same time to achieve the desired result. The article below provides instructions for popular brands of Bluetooth speakers, but if you're still in doubt, it's best to refer to the manual that came with your device.

Important points before disassembly

Before disassembling, make sure it is necessary. In nature, it may seem that the sound has become quieter and one of the speakers has broken. You can enhance the factory sound by switching from low frequencies to high frequencies. This is done by simultaneously pressing the “-” and “Bluetooth” buttons for 10 seconds. After this time, the sound will become louder and the buttons can be released. Returning to the previous sound is done in the same way.

Important! Experimenting with sound profiles may damage the speaker. For work it is better to use factory settings.

No particularly important preparatory steps are required before dismantling the columns. It is enough to clean it from dust and moisture, if any. It is recommended to disassemble on a table or on the floor with a blanket so as not to lose small fasteners.

Before starting work, you should study the instructions that should be attached to each special column or literature. You can watch detailed video tutorials on disassembling various jbl speaker models on the Internet. There are types of devices such as jibil charger, flip. There are also Chinese versions of such speakers.

How to reset a Sony wireless speaker

1. In the control area of ​​the device (often under a rubber flap) there is a small button with a hole called “Reset”. To press this button, use a pencil or other sharp object.

2. Your speaker is now reset and can be used as if it were a new speaker. Please note: resetting your Sony speaker does not automatically clear the list of paired Bluetooth devices, so it is best to follow the step above: find the "forget device" or "unpair" option in the settings menu ).

How to troubleshoot connection problems

To make the speaker work, determine why it is not working and fix the problem.

Before the beginning

If you connect a portable speaker and it doesn't work, don't panic. Check the battery charge and see if it is turned on or not.

Pay attention to Bluetooth, if it is not turned on, the device will not be able to play sound.

In 90% of cases, the startup sequence is described in the instructions that came with the purchased device.

Column not included

To turn on the column, click on “On”. But there are cases when when you press this button, the indicator lights do not respond. This indicates that the device did not turn on.

The reasons are usually simple:

• Battery is 100% discharged;
• swelling of the battery;
• The device is faulty and requires repair.

Why is the speaker not visible via Bluetooth?

There are many reasons why the column is not visible when turned on. If you are not sure that you can fix the problems yourself, contact the service center.

In 80% of cases, the main reason is turned off Bluetooth. This happens in case of inattention or the visibility period of the paired device has expired. Before turning on, check if Bluetooth is turned on.

On Chinese speaker models, you can reboot Bluetooth; to do this, press “M” and hold for a few seconds until a characteristic sound is heard.

Drivers

The problem in 50% of cases also occurs in the computer. If the necessary drivers are not installed, the device will not detect portable speakers.

In addition, drivers may be incompatible with a modern device or computer operating system.

Pairing

When you buy a wireless speaker, most often it is connected to all the devices you have. This includes a computer, a tablet, a smartphone and even a TV.

If you use the device with different devices, you will select the “Automatic connection” functions. In this case, other devices may not see the speaker because it is already connected to another device.

How to reset your Sonos speaker (wired or Bluetooth)

1. If your Sonos speaker is connected, disconnect the device. Then, depending on your device, hold down the connect button or play/pause button, connect the speaker and wait until the indicator flashes orange and white.

2. If your Sonos speaker charges through a base (such as the Sonos Roam), follow the steps above, except place the speaker on the base instead of plugging and unplugging it.

3. When the reset is complete, the indicator should turn green, allowing you to use the speaker as if it were new.