There is noise in the headphones. How to fix the noise problem in headphones on a Windows 10 computer: 5 ways

Damage to the headphone cable.

First, we check the condition of the cable. It must not be interrupted or damaged.

This often happens, and the reasons can be very varied: the cable can be crushed by furniture, or stepped on with a heel. Pets can chew, etc.

There is one interesting point. Laptops usually have one audio jack, but the system unit usually has two. One of them is on the front side, the second is on the back. It is much more convenient to connect in front, but this may add additional hiss.

This is due to extension cords and adapters. At the back of the system unit, the audio output is directly connected to the sound card, and by connecting a gadget to it, the sound quality improves.

If the cable is intertwined with other wires, noise may occur in the headphones. The cables should be carefully positioned, away from each other.

Treatment

Help before diagnosis

You can completely get rid of tinnitus only after treating the underlying disease that caused the discomfort. Therefore, if extraneous sounds appear for no reason, you should not postpone a visit to the doctor. To reduce discomfort until the cause of the disorder is identified, mild herbal sedatives and soothing herbal teas are recommended. In some cases, self-massage of the ears helps: rubbing movements, pressing with your palms on the ears.

Conservative therapy

Since tinnitus is caused by various causes, treatment regimens are selected strictly individually, taking into account the underlying disease and concomitant pathology. A prerequisite for the effectiveness of therapy is the elimination of provoking factors (refusing loud music on headphones, changing jobs, avoiding noisy parties and visiting nightclubs). Etiotropic therapy includes antibiotics, anti-inflammatory and antihistamines, angioprotectors, other groups of drugs, and their combinations. For the symptomatic treatment of tinnitus, use:

Sedatives
. Herbal and synthetic drugs reduce the excitability of the brain and the speed of nerve impulses. Medicines also normalize the emotional state.
Antidepressants
. Medicines are effective for constant noise, which is caused by chronic diseases, Meniere's disease. The drugs affect centers in the brain and increase the concentration of serotonin.
Tranquilizers
. Indicated for severe ringing or buzzing in the ears, leading to insomnia and reducing performance. The effectiveness of the drugs is due to their sedative and hypnotic effects.

Experimental treatment

Tinnitus retraining therapy (TRT) is an innovative direction that is a type of cognitive behavioral therapy. The program involves individual sessions using psychotherapeutic methods, during which a person is taught ways to relax and techniques for switching attention. A component of the treatment is individually selected sound therapy. The patient is asked to listen to a pleasant noise (the splashing of waves, the rustling of leaves, the sound of rain). Over time, the brain learns to block these sounds, while the perception of pathological noise decreases.

Surgery

If humming, ringing, or tinnitus are associated with purulent inflammatory diseases, it is necessary to open and drain the tympanic cavity, which significantly speeds up the healing process. If tumors of the auditory analyzer are detected as the main cause of the disorder, they are removed with mandatory cytomorphological examination. Treatment of malignant neoplasms involves a combination of surgery with chemotherapy and radiation therapy. In aneurysms, the affected vessel is clipped.

Technical condition of headphones

If no fault is found when checking the connectors and cables, you should check the general condition of the device. You need to examine them carefully. There may be damage to the case, which may indicate that they fell or hit something hard.

To determine that the cause of white noise in the headphones is not their technical condition, we try to connect them to another sound source. If the noise disappears, then the gadget is in order, and you should look for another reason.

We find parts of the computer that are phoning

This can also happen: crackling noise in the headphones from PC components . We turn off everything that can be turned off one by one so that the computer can work. We start with DVD drives (and the like), hard drives (except the system drive). You can disable the video card if the processor has a video chip (switch video processing to it and check). Or we start some sound and listen with the “picture” turned off.

This may also be due to poor connections, grounding and many other reasons. If there are wires “hanging” inside the case near the boards, try to move them away. Perhaps they are phoning because of the “Chinese” isolation.

Lack of grounding

Home sockets that do not have grounding are quite common. Headphones, like a computer in general, are very sensitive to the quality of electrical power, so problems may arise in their operation.

Attention! All activities involving electricity and grounding are dangerous. Leave it to the professionals.

The correct solution to this problem is to ground the outlet, if possible. You won't be able to do this on your own. This requires an electrician and time.

Testing headphones on another device

There are two main reasons for poor quality sound and noise:

problem with the device (smartphone, tablet, laptop or computer);
in the wireless headphones themselves.

Therefore, when buying Bluetooth headphones, it is better to immediately check their compatibility with the transmitting device in the store.

Old headphones, if the sound quality or noise deteriorate, should also not be scrapped, because the device associated with them may be problematic.

To make sure, you need to connect the headphones to any other device.

If the sound characteristics are improved, the problem will no longer have to be looked for in wireless HeadSet headphones, but in a smartphone or computer.

Finding interference from connected devices

Headphones on a computer can generate noise from connected devices - USB and others. We simply turn off all devices (preferably one at a time) and listen to see if the crackling noise has disappeared. First of all, of course, we disconnect USB devices. But interference can also come from speakers, a mouse, etc., so you need to check everything.

It is also worth checking whether there is noise in the speakers, and whether it will disappear with various sound adjustments (separately on the speakers and in the system). And if the volume can be changed on the headphones themselves, we try to set the volume in the system to maximum, and turn it down in the headphones to a comfortable level.

Different versions of bluetooth transmitters

Sometimes you can hear the opinion that the hissing of headphones, noise, occurs due to a mismatch of Bluetooth versions of the main device, gadget.

Wireless headphones work with the BR/EDR protocol, designed for audio transmission, and the Bluetooth version does not have any effect on the quality of the sound signal.

It is not the Bluetooth versions that influence the hardware compatibility of devices and the sound quality, but the codecs that are used.

If the smartphone supports popular codecs (AAC, aptX, LL, LDAC), but the headphones do not, then the transmitted signal will be encoded using the SBC codec, standard for all Bluetooth devices, and the sound quality will be the worst.

Conclusion

Here was an overview of the reasons why you can hear extraneous noise when you turn on and operate your computer. You should always pay attention to changes in work and take measures so that they do not suddenly lead to the failure of your computer or loss of data.

In turn, you can also help us a lot .

Just share the article on social networks with your friends.

By sharing the results of the author’s work, you will provide invaluable assistance to both him and the site as a whole. Thank you!

Causes of noise and hissing in headphones on a computer

To determine why your headphones are crackling or making other unpleasant sounds, look at common problems.

Driver and software problems

PC operation is impossible without control programs and drivers. Malfunctions in their operation are a common cause of extraneous sounds in Bluetooth headphones. Correcting the problem will help to correct it, updating the driver, using the device manufacturer’s programs.

To check for the latest version of the sound driver on your computer, you must:

Go to “My Computer” and select the section with device managers.
In the window that appears, select the section with sound, video and gaming devices.
Identify the sound card.

If there is an exclamation mark next to the sound card, the driver definitely needs to be updated. But even if there is no warning, it is recommended to reinstall the program.

To update the driver on your computer, right-click on the name of the sound card. After that, select update and wait until the wizard automatically finds updated drivers on the Internet. To configure the program on a laptop or computer, you can also use DriverPack Solution.

The internal components of the laptop/computer are damaged

Beeping, crackling and noise in headphones are often associated with computer components. To determine the cause, perform one-by-one shutdowns:

DVD drives;
hard drives, leaving system ones;
video cards.

Audio jack malfunction

If you connect the headphones via a cable to another device, for example, to a phone, and there are no more extraneous sounds, the quality will be restored - this means that the reason is in the computer’s operation.

First you need to check the condition of the connectors and connect headphones to each of them.

The nest is damaged if:

pull out the cord carelessly;
contacts are poorly soldered;
the internal shielding of the wires is broken;
The plug does not fit completely into the socket. There are models that, when connected, create a gap of 1 mm.

PCs are equipped with two audio inputs: on the front and rear panels. If the sound in the headphones deteriorates when in contact with one of the connectors, then you should use a working option.

Problems with the sound card

The quality of music playback by equipment is affected by the state of the sound card. If a part malfunctions, the computer will not be able to transmit sound signals, so instead of normal sound:

a buzzing sound will be heard;
squeak;
the sound will crackle and be interrupted.

The only way to solve the problem is by replacing the faulty element, then there will be no extraneous noise.

We fix incorrect operation of drivers and software

Noise in headphones (on Windows 10 or earlier) may be caused by incorrect software or drivers. Firstly, it’s worth figuring out whether the headphones hiss only in a specific situation (when listening to music through a specific player, for example) or all the time. If, of course, we check the settings of this application in only one program, you can contact support.

If there is interference in the headphones while running any program on the computer, it is worth checking the operation of the sound drivers. Control Panel - Device Manager (in Windows 10, just type in the search bar), find your sound card.

If there is an exclamation mark next to it, then update the drivers. Right click on a line – context menu. If automatic updating does not help, go to the website of the manufacturer of your audio card (for example, Realtek), download the necessary ones and force the update. Before doing this, you should remove all existing sound drivers and you can generally remove the device in the manager.

You can update drivers even when that same exclamation mark is missing. Sometimes it helps. In addition, you can update drivers using special software that analyzes the system and, if necessary, can download the necessary drivers. For example, IObit Driver Booster.

Extraneous noise in the headphones on a laptop may be caused by the power saving mode. If it is turned on, the sound card may simply not have enough energy at certain moments, the built-in amplifier will not work correctly, and so on.

Changing the power saving mode

Control panel - System and security - Power supply. Select “High Performance”, restart the computer (just in case, not necessary) and listen to see if the crackling noise is gone. If not lost, we return a balanced one. We save.

In terms of software settings, there is another option - updating the BIOS. Sometimes hissing in headphones on a PC arises precisely from the BIOS and the operating features of a particular version of the shell.

High volume on low-quality speakers

A volume above 50% on inexpensive, low-quality speakers (and headphones) may well be the cause of noise (they say that the speakers begin to “hum”).

In general, all speakers and headphones produce noise. True, higher-quality speakers (and, as a rule, more expensive ones) produce clearer sound even at high volumes, and only produce noise at maximum. While cheap ones - when the volume reaches medium levels...

Pay attention to the volume level

Also pay attention to the microphone. If your speakers are turned on loudly and the microphone is working, then a closed “ring” effect may be observed.

Computer power saving mode

In Windows, you can select several operating modes regarding the electrical power mode. Initially, the operating system operates according to a balanced power supply scheme. With its help, at low loads on hardware units, it is possible to reduce electricity consumption. This option is optimal for laptops. As for a desktop computer, this does not matter in its operation, since it works with a constant connection to the network. But if this mode is still turned on, then some of its devices may operate in a gentle mode, and this may lead to a problem such as noise in the headphones.

To fix this, simply select the “High Performance” mode in the “Power Options” item in the Windows Control Panel. After this, it is advisable to restart the computer. If interference was present due to the power supply mode, it will disappear immediately.

Diagnostics

When tinnitus occurs, the patient is referred for examination to an otolaryngologist, who identifies the otogenic causes of the symptom. The diagnostic search is aimed at a detailed study of the functionality of the auditory analyzer and the structure of all parts of the ear. A comprehensive examination involves instrumental and laboratory methods, the most informative of which are:

Instrumental examination of the ear canal
. Otoscopy is necessary to exclude inflammatory diseases of the outer and middle ear, ruptures of the eardrum. To assess the degree of mobility of the tympanic membrane, a pneumatic Siegle funnel is used. The method is complemented by determining the patency of the auditory tubes.
Audiometry
. To detect hearing impairment, special devices are used that generate sounds of a given frequency. Speech audiometry is intended for rapid assessment of the function of the auditory analyzer. Using tuning fork tests, pathologies of the middle and inner ear are differentiated.
X-ray studies
. Ear noise is often caused by neurological causes, so patients usually undergo x-rays of the skull bones. In patients with symptoms of osteochondrosis, it is necessary to examine the spine. For more detailed visualization of space-occupying formations and structural disorders of the brain, MRI of the head is also prescribed.
Angiography.
If an aneurysm or atherosclerotic lesion of the cerebral vessels is suspected, a contrast angiogram is recommended, which allows one to visualize the structure of the vascular bed and establish the exact localization of pathological changes. An even more modern method of examining blood vessels is MR angiography.

Laboratory methods are used as auxiliary methods; the examination plan includes general and biochemical blood tests; if there is a possible infectious cause of the disorder, serological tests (ELISA, RIF, PCR). In inflammatory processes accompanied by discharge from the ear, bacteriological culture is performed. In complex diagnostic cases, to establish the cause of ear noise, consultations with other specialists (neurologist, oncologist) are required; some patients are indicated for a psychiatric examination.

Otoscopy - instrumental examination of the ear canal

How to eliminate wheezing sound

Several absolute methods have been developed to solve the problem. First you need to turn to eliminating software errors. Especially if a new headset is used in conjunction with a computer.

Disabling additional effects

On a laptop and PC running Windows 10, there are settings that allow you to use additional effects when playing audio. So, with their help, the owner of the device can feel like he is in the center of a concert venue. But from time to time the effects do not work correctly, causing wheezing and crackling sounds.

To disable “improvements” you need to:

Right-click on the speaker icon located in the system tray.

Select "Playback Devices".
LMB click on the name of the equipment with which problems occurred.

Click "Properties".
Go to the “Additional Features” tab.
Stop using effects.

On a note. By default, there is no option with additional functions. For it to appear, you need to check the item of the same name in the “Advanced” tab.

After changing the parameters, be sure to click the “Apply” button. Otherwise, the new settings will not be saved. If everything is done, check the functionality of the headset.

Disabling exclusive mode

Experienced users notice that the headset's sound crackles when using exclusive mode. The option is designed to play an audio track from only one program, and the function often conflicts with sound card drivers. Therefore, in attempts to solve the problem, try abandoning exclusive mode:

Open the “Properties” of the speakers using steps 1-4 from the previous instructions.
Go to the "Advanced" tab.

Uncheck the box responsible for activating the mode.

Save the new settings.

Now try playing a video or playing a piece of music. Perhaps the problems are not related to the computer settings, but to errors in the file itself.

Changing the output format

Hissing in headphones is often the result of incorrect playback format settings. It can be changed in the “Properties” of the headset. Here it is recommended to set the generally accepted value “16 bits, 44100 Hz”. It is supported by most sound cards, regardless of the year of manufacture. If it doesn't help, switch to standard settings.

Sound source problem

Headphones quite often fail due to violations of operating rules. However, problems may also be hidden in the main sound source. For example, quite rarely, but driver errors still occur. Software damage or operating system failures cause problems that cause noise and rattling. You can identify the problem by connecting different headsets; if they all produce the same result - an unpleasant hum or hiss, then the problem is in the device driver. Handle your devices with care and follow the operating instructions.

Incorrect sound settings on a Windows computer

On wireless HeadSet models, the volume level is adjusted directly on the gadget itself.

At the same time, an increase in sound power leads to extraneous noise in the headphones, and the operating time of the built-in batteries is significantly reduced.

Volume level

You can avoid headphone noise on your computer by adjusting the sound settings of your computer's operating system.

To do this, raise the volume level of the computer in any Windows, as well as in the player application through which the audio stream is listened to, to maximum, and only then increase the volume of the headphones using a hardware control.

Classification

According to the sound characteristics, tinnitus is divided into tonal - continuous sounds of the same frequency (ringing, whistling, low-frequency hum) and non-tonal - periodic unpleasant auditory sensations in the form of clicks, crackling, rumble. According to the duration, the symptom is divided into acute (up to 3 months), subacute (from 3 to 12 months) and chronic (lasting more than 1 year). In clinical practice, tinnitus is classified depending on the cause of its occurrence:

Subjective noise
. Often caused by prolonged exposure to loud sounds on the auditory analyzer. Extraneous sounds are heard only by the patient, which prevents the person from concentrating on the actions being performed or talking.
Neurological noise
. This type of tinnitus is caused by damage to specific nerve receptors in the inner ear, as occurs in Meniere's disease. Patients experience a strong buzzing sensation, usually accompanied by dizziness.
Somatic noise
. It can be associated with damage to any organ, pathological impulses from which excite the auditory analyzer. Somatic tinnitus is in some cases triggered by movements and touches.
Objective noise
. The rarest type of disorder, which is caused by deformations of the ear vessels and pathology of the muscular system. Extraneous “pulsating” sounds can be heard by the doctor when using a stethoscope.

To assess discomfort, Soldatov’s classification is used, which subdivides ear noise according to severity. At grade 1, performance is preserved, the person is adapted to extraneous sounds. The appearance of intense noise at night indicates a transition to stage 2. A constant strong hum, which interferes with the performance of usual duties, is disturbing at stage 3; with a complete loss of performance, stage 4 of the disease is diagnosed.

Lack of current sound driver

A common cause of noise in Bluetooth headphones is a problem with the control program (driver) for the sound card.

A driver, like any program, needs error correction and adjustments.

Therefore, for flawless operation of the sound card and clear sound in wireless headphones, it is necessary to install the latest version of the driver from the official website of the device manufacturer.

How to check the availability and relevance of drivers?

To check if the latest sound driver is installed on your computer, you need to:

enter the “My Computer” folder, go to the “Device Manager” section;
in the window that appears, select the “Sound, video and gaming devices” column;
Find your computer's sound card in the list that opens.

If there is an exclamation mark next to the sound card, the computer driver needs to be updated. But even in the absence of a warning, it would be better to reinstall the control program.

Driver setup

To update the computer driver, right-click on the line with the name of the sound card.

Next, select “Update driver”, and then allow the wizard to automatically search for updated drivers on the Internet.

In the same way, you can check and update the sound driver for wireless headphones.

You can configure your computer's sound card using auxiliary programs, the most popular of which is DriverPack Solution.

Transcript of the podcast

News is tight today. Recently, the website harmonycentral.com went through a big update, they changed the design, changed the sections, and now it’s very, very difficult for me to get bass guitar news out of there. Therefore, today I did not prepare any news and decided to immediately tackle the topics of our listeners.

Why do headphones and speakers wheeze?

An interesting topic was raised by listener tsv1986. “I noticed,” he writes, “that computer speakers and headphones from a bass guitar very quickly become unusable, begin to “choke” and rattle. Are there any specific models of these devices that will last a long time when listening to a bass guitar through them?” Headphones and speakers wheeze

? The problem is known, and probably many of us have encountered it. Sooner or later, the speakers and headphones through which most of us try to play and listen to our music become unusable. In particular, they begin to wheeze, the speaker begins to produce some rustling sounds, which, you see, is unpleasant.

In our podcast today, I will focus all my attention, first of all, on headphones, since this topic is a little closer to me, but in principle, you can easily extrapolate all the data and all the parameters that I will tell you today to the speakers, then there is all this will suit them too. Today I will not look at small “brain-integrated” headphones, as I call them, but will completely focus my attention on normal, large headphones.

Choosing headphones for bass guitar

In general, headphones can be divided into two types: monitor headphones, which try to convey the sound as it is, without introducing any distortion, and HiFi headphones, which involve various sound enhancements. Let the quality of these “improvers” remain on the conscience of the designers who develop all this stuff, but you and I, as musicians, are primarily interested in monitor headphones.

Monitor headphones come in two types - open and closed.

Open headphones more accurately convey the sound of instruments, but it is the bass frequencies that they “fail” a little. One more thing - these headphones are not soundproof, that is, the person who sits next to you will hear what is happening in your headphones. In some cases, this does not pose any problem, however, if you plan to study at night or use these headphones for sound recording, then they are unlikely to suit you.

Closed headphones transmit bass frequencies better, but it is quite difficult to sit in them for a long time - your ears get tired. For you and me, as bass players, closed headphones are more suitable, so we will focus on them.

Now let's touch on the characteristics. The characteristics that I will talk about are valid for both acoustic systems and speakers.

When you choose headphones, coming to the store, you can look at the amplitude-frequency response of the headphones (or speakers). In general, the average ear detects sound in the frequency range from 20 to 20,000 Hz. It seems to me that it is absolutely not worth buying some super expensive headphones just because they have a wider amplitude-frequency response (that is, this range is wider), especially if you use these headphones for practicing at home. 20-20,000 is a completely normal, adequate range. In addition to the width of the range, you should pay attention to the smoothness of the amplitude-frequency response. It shows what frequency is being played back and how loud it is. The ideal is a direct amplitude-frequency response, but this ideal, of course, is unattainable. In practice, the left and right edges are usually “overwhelmed” - low and high frequencies. This is normal, don't be alarmed. What is worth paying attention to is the absence of sharp jumps and changes. This curve should not be wobble, it should still be quite smooth.

Another characteristic that is usually paid attention to is the distortion factor. The recommendation here is simple - you need to take headphones with a distortion coefficient of at least 1%. If you take higher quality headphones, that is, the coefficient is less than one percent, then you simply will not notice the improvement in sound. 1% is approximately the threshold that our ears perceive.

Now let's touch on two characteristics that actually determine whether the headphones wheeze

when playing loud music and bass or will not.

Sensitivity. This setting tells you how loud your headphones will sound. The sensitivity coefficient of normal headphones is at least 100 dB. It is better if the sensitivity exceeds 100 dB. It’s not at all a fact that you will turn your headphones on at maximum volume, but if they sound good at maximum volume, then at medium volume they will sound fine.

Go ahead. The critical parameter that you need to pay attention to when you select headphones specifically for bass, for loud music, is the impedance, or, in Russian speaking, the resistance at the headphone input to the audio system. Actually, this parameter is the reason for all your and our troubles. The higher this resistance, the less likely it is to damage the speaker with some loud, overloaded sound. This is on the one hand. On the other hand, the greater this resistance, the more powerful and high-quality equipment you will need, since this resistance will “eat up” your useful signal. You need to look at the equipment through which you play. If it is some kind of bass processor, you need to look at its documentation; if it is an amplifier, you need to look at the documentation of the amplifier and find out what resistance (impedance) the output of your playback device is designed for. Computer headphones usually have an impedance of 30-80 Ohms, some cheap headphones for a player may have an impedance even less, that is, the lower this resistance, the easier it is to “drive” your headphones, and, accordingly, the less powerful the signal is required for this to get some sound. But at the same time, if you give them a loud signal, they will begin to wheeze and become unusable. For amplifiers this value is usually 200-300 ohms. If you connect computer headphones to such an amplifier, they will very quickly become unusable. On the other hand, if you plug headphones with a resistance of 200-300 Ohms into any small player, the battery will run out instantly and the sound that will be played will be very, very quiet. Therefore, there is no need to go too far here, but you need to pay attention to what resistance your playback equipment is designed for.

For myself, I have selected several models of headphones, which I would recommend that you pay attention to. I looked at models from two companies: AKG and Sennheiser. There are no objective reasons for this, I just like the products of these particular companies.

Speaking of AKG, I picked up the AKG A301 XTRA model with a sensitivity of 94 dB and a resistance of 100 Ohms, costing about 3,000 rubles, and the K501 model with the same sensitivity, but the resistance is slightly higher - 120 Ohms, they cost 4,700 rubles.

Sennheiser headphones are a little more expensive, but their performance is more serious. For example, Sennheiser HD280-13. Their sensitivity is 102 dB, resistance is 300 Ohms, they cost 5,500 rubles.

So, gentlemen, bassists, if you are experiencing problems with headphones or speakers, pay attention to the sensitivity, impedance and parameters of your playback equipment.

Restoration of an old bass guitar

Another issue I would like to address today is thoughts and recommendations regarding restoring old bass guitars. The same tsv1986 asks: “How to determine whether a guitar is worth restoring at all? What nuances might arise here, how to choose pickups and accessories?”

First of all, if you are a beginner musician, then I would not advise you to start with restoration, since you simply have no idea what the sound of a normal bass guitar is, you don’t yet have an “ear”, you don’t know what what is good and what is bad. This is a mega-recommendation right away: you don’t need to restore the Ural - nothing good will come of it. Another point is that if there is a crack on the neck, it is also better to put this guitar aside and not mess with it. I will not consider here some clinical case where the guitar is completely broken and killed. Let's assume that the strings are stretched on it, they somehow hold on, and you can listen to how the tree sounds. Here you have no one to rely on except yourself, you need to take it and listen to how the bass guitar sounds. In this case, it is better to put new strings on it, since now there may be ancient strings killed by time that do not sound on their own, and no matter how good the wood is, you will not get a good sound from a guitar with such strings. Take normal strings, install them on the guitar you want to upgrade, and listen to whether you like the sound of a “clean” guitar without electronics or don’t like it. If you like it, it makes sense to invest in pickups and accessories. If you don’t like it or feel, for example, that the sound is somehow poor or it fades away very quickly, then, perhaps, it is also better not to restore this guitar.

If the wood sounds okay, you can put passive pickups on the guitar. If the wood is quite mediocre, but you really want to restore the guitar (well, you like it!), then you need to focus on active electronics and active pickups, since normal active pickups can pull out wood that is quite average in quality. I won’t talk about pickups now, because I don’t see the point - there is an excellent podcast about pickups, this is a GuitArt podcast already familiar to my listeners, number 3 dated May 3, 2009, I will provide a link to this podcast. In it, the guys examined in some detail all the companies that are present on the market today, although they looked specifically at guitar pickups, but the information given there is completely extrapolated to our bass instrument.

How many pickups should I install: one or two? Here I would recommend that you focus on some kind of serial instrument or even look at what was on this guitar before - if there are two pickups, then perhaps it makes sense to install two, but if there is one, then this is a matter of taste.

The fittings are also a matter of taste. The main thing is that it fits in size, that you like it, and it’s difficult for me to give you any recommendations on models or manufacturers. I would also recommend installing something similar to what was already on the guitar.

Personally, I have this guitar, it's called a Jolana D-Bass, which I would really like to restore, and first of all I will change the tuners on it and I will change the pickups on it. I'll probably install DiMarzio pickups - I've looked at several models for myself here - and the tuners and accessories - I'll just go to the store and take what comes to hand, what I like, without worrying too much about it.

Briefly about Guitar PRO

Happy news! Guitar PRO version 6 was recently released. You can download the demo from the official website and play around for a few days. If you don’t know, Guitar PRO is our everything (my everything, that’s for sure!), a program that allows you to enter tablature into your computer, that is, it allows you to type music even if you don’t know the notes. Personally, I use Guitar PRO both for training, for self-study, and for preparing new material. When we get together, rehearse and some new material appears, we then transfer it to Guitar PRO in any case so that we can keep it for a long time. Anything can happen - melodies are forgotten, some transitions are forgotten. In addition, if one of the band members falls out of the rehearsal schedule, we can always take a computer with Guitar PRO with us, turn on the missing track and play, in fact, without the missing band member. It’s also very convenient, this is exactly what happened to us several times.

Guitar PRO 6 came out just last week. They are asking about $60 or a little less for it. In my opinion, for such a useful and excellent program this is not a price at all, I would buy it without hesitation if I had a normal PayPal. But while it’s gone, I’ll be looking for some workaround to pay for this program.

Finally…

Finally, I would like to highlight one more question from a listener named Expert. He asks me: “I don’t know what to do, what to take on... I love all kinds of music, I play thrash. How to decide and bring something to the forefront?

The question is complex. I’m not a shepherd, I’m not a spiritual mentor, and in general, in my opinion, this is all very individual and it’s pointless to give any advice here.

Regarding the second part of the question, where is it better to start studying technique, musical notation, and other things. The listener lives in the village, there are no teachers nearby: “There’s no way to leave, it’s the second year, but I’m playing as before...” There is only one recommendation here - regular practice. It doesn’t matter whether you study some kind of video school, it doesn’t matter whether you study a book or some kind of interactive course (by the way, Akella has a very good interactive course, I recently bought it and watched it, it’s basic and very suitable for beginners musicians) – this is all secondary. The main thing is perseverance and constant practice. You need to constantly study, you need to constantly and regularly play, devoting a fairly large amount of time to your hobby. If you do this, the result will not take long to arrive. This is my position on this issue.

Connecting any device to a computer is a process that requires special attention. The more complex the peripheral component, the more complex the procedure. Quite often, headphones/speakers and microphones are connected to computers. These elements help you communicate online. It is very difficult to imagine a modern user without them.

On the one hand, connecting headphones and a microphone does not require anything special. Only after the idea has been brought to life, it often takes a long time to configure these components. They work with errors. Most often, users wonder how to remove noise from headphones on a computer. Why does he even appear? What will it take to fix the problem? And is it really possible to get rid of it? If you can answer all the questions asked, connecting a headset and working with sound on a PC will not cause any trouble.

Low charge

The quality and stability of the signal is affected not only by the distance between the transmitting and receiving devices, but also by the charge level in the batteries of Bluetooth headphones and devices.

Therefore, before troubleshooting, fully charge the battery capacity of the paired devices.

If immediately after a full charge the sound quality is good, but after a short time it sharply deteriorates, we can safely conclude that the batteries of the wireless headset do not hold a charge and need to be replaced.

How to identify the cause of the problem

When a hiss appears in a wireless headset, the first thing you need to do is determine what exactly the problem is: in the headphones themselves or in the device to which they are connected.

Mechanical damage

The headphones need to be inspected from all sides for dents, cracks, chips, damage to the case, ports, and control buttons. You need to connect them to other devices and check the sound. If the noise continues, the problem is most likely in the headset itself. You can fix this problem yourself (if you have knowledge in the field of electrical repair) or at a service center.

Low charge

Bluetooth headphones are a device with a portable battery. For uninterrupted autonomous operation of the gadget, it requires regular recharging. When the battery level is low, sound quality may suffer. You should start looking for the cause of a headphone malfunction by checking the charge level.

How to remove noise and interference from headphones - first fully charge them, then check the sound. In most cases, this simple operation solves the problem of poor sound.

How to remove background noise in wireless headphones

Before you remove the hiss in your headphones, you need to study all the points characteristic of a wireless headset. Many models produce background noise. In this case, the game or music will sound quiet or completely absent.

This phenomenon cannot be called a breakdown, but rather a characteristic feature. This will help you check:

checking headphones on other devices;
studying reviews of other users about a specific model.

To stop the device from making noise, connect wireless headphones to the audio codec. For this:

find out the type of codec supported by the headset;
activate it using a proprietary application;
activate the “Developer Menu”;
make a choice in favor of a suitable codec.

This will help eliminate white noise in the headset.

Sound card hardware failure

A faulty sound card is one of the most dangerous reasons. The sound card may work in normal mode, but due to some minor failure, produce noise in the headphones. It is not possible to eliminate such problems at home, and it is almost impossible to diagnose them correctly. In this case, you will have to contact the service center.

In order for the headphones to work correctly and to avoid noise and other interference, they should be used correctly. Avoid, if possible, external damage to the cable and the headphones themselves. Be careful when connecting them and follow all the recommendations given above. Install suitable drivers.

By choosing good quality devices from trusted manufacturers, you have a great chance of not encountering such a problem as noise in headphones at all!

Article rating:

Loading... Share with friends:

Tweet Share Share Send Like

Why is there noise in headphones? Link to main publication

.article-wrap

Related publications

Connecting wireless headphones to your TV
What is the harm from wireless headphones?
How to wear the headset correctly
Checking the microphone online on headphones

Add a comment Click here to cancel reply.

Noise from mouse wheel scrolling

Sometimes the noise from scrolling the mouse wheel gets into the audio interference and is heard in the speakers. Sometimes such noise can be quite strong and it is simply impossible to listen to music while working.

If you hear sound from the mouse in the speakers, then I recommend taking the following series of measures:

try replacing the mouse with a new one;
if you use a mouse with a PS/2 connector, replace it with a USB one (or vice versa);
You can also use PS/2 to USB adapters. For example, by connecting a mouse with a PS/2 connector to a USB port;
try using a wireless mouse.

Sources

https://myearphones.ru/instruktsii/pochemu-shumit-v-naushnikah
https://1bluetooth.ru/blyutuz-naushnik/kak-ubrat-shum-shipenie-pomehi
https://AudioTop.ru/info/kak-ubrat-shipenie-v-naushnikah
https://pro-naushniki.ru/vidy-naushnikov/dlya-igr/ubiraem-shum-v-naushnikah-v-igrah-na-kompyutere
https://it-tehnik.ru/windows10/oshibki/shum-v-naushnikah-na-kompyutere-kak-ubrat.html

[collapse]

Broken USB input

Incorrect sound may occur after connecting other gadgets to the USB connector. The problem could be caused by a mouse or a faulty keyboard. In this case, when you press a key, you will hear clicks. There are quite objective reasons why this happens.

When information is transferred, the load on the PC increases. To reduce it, you need to do the following:

1. Switch the plug to another port.

2. You can also purchase a splitter and repair the old connection sockets.

3. Start using wireless devices.

The problem is that very often users do not pay due attention to their computer and do not immediately repair problems that appear. As a result, the USB connectors one after another become unusable, and only one remains, into which a splitter is connected, and it is on it that the entire load falls, which causes its increase.

How to properly wear in-ear headphones