How to charge QCY wireless headphones

Charging Bluetooth headphones QCY T10

Charging the headphones

Place the QCY T10 headphones into the charging case. During charging, the indicator light turns red, and when the maximum charge is reached, it turns green for 1 minute.

Charging the case

Charge the case using a USB cable. The indicator light turns green during charging and turns off when charging is complete.

Charging time for QCY T10 headphones: up to 2 hours

Read in full: Instructions for using QCY T10 Bluetooth headphones. Turning on, turning off...

Instant pairing

Qs1 T1c connect to your music source using Bluetooth. The quality of communication is good. As stated in the specifications, Qcy T1 maintains a signal at a distance of up to 10 meters, but this is provided there are no obstacles. If you listen to music while walking around a small apartment, the headphones perfectly support the signal.

Instructions for pairing Qcy Qs1 T1c with a gadget for the first time:

Remove the right earphone (lead) from the case. The LED indicator on it will immediately start blinking - this is a signal of readiness for pairing.
Turn on Bluetooth on your smartphone (or other device) and find QCY QS1 T1. After connecting Qcy T1 to the smartphone, the indicator will stop flashing.
Take the second earphone out of the case, it will automatically connect to the right one.

After the Qcy Qs1 T1c is paired with the device for the first time, they will connect to it automatically. If you put the Qs1 T1 back in the case, it will automatically turn off.

How to pair one earphone with another:

Disable Bluetooth on the phone (and other devices) with which the headphones were paired.
Turn off the Qcy Qs1 T1c by putting them in the case.
After that, simultaneously press the buttons on the bodies of both headphones, holding them for 20 - 30 seconds.
During this entire time the LEDs will flash. When the flashing stops, after a short pause the indicators will flash a final 3 times.
After this, release the buttons.
Now turn on the Qcy Qs1 T1c by pressing the buttons on both bodies at the same time.
The indicators on both earbuds will flash several times, after which the left one will go off.
Then proceed as if you were pairing your headphones with a music source for the first time.

Buy on Aliexpress

Control methods

To turn on the Qs1 T1c, you need to press the button on the right earbud and hold it for 1 second until the indicator lights up.
As we have already found out, QCY T1C can be turned off simply by putting it in the box, but this is not the only option.
To turn off the gadget in an alternative way, hold down the button on the right earphone for 5 seconds.
To turn on the device after disconnecting it described above, hold down the buttons on the bodies of both earbuds and hold them for a few seconds.
If connection with the source is lost or the music is turned off, after 10 minutes the QCY T1C will turn off automatically.
If you need to play or pause music, press the button on any of the headphones.
To skip to the next track, press the button on the right earbud once;
To return to the previous track, press the left Qs1 T1 button twice.
To call the voice assistant, press the button of any Qs1 T1 in standby mode and hold it for 1 second.

Receiving incoming calls:

To answer an incoming call, press once on any Qs1 T1.
To end a call, press the button twice.
If you receive a parallel call during a call, press any button once. This way you will receive the second call while keeping the first one on hold.
To switch between two calls, double-click any button.

Mono mode:

If necessary, you can use only one Xiaomi Qcy T1 earphone, putting the second one in the box. To operate a single earbud, follow these instructions:

To turn on the earbud, press and hold the button on the device body for 1-2 seconds.
To turn off, press and hold the Qs1 T1 button pressed for 3 seconds.
To reject an incoming call, press and hold Qs1 T1 for 2 seconds.
If you need to answer an incoming call or end a call, briefly press the button once.
To forward an incoming call to the headset, or vice versa to the smartphone during a call, press the button and hold it pressed for 1 second.
To switch the device out of headset mode or mute the microphone after you have given a command to the voice assistant, simply briefly press the Qs1 T1 twice.

How to charge QCY T11 S headphones

Charging the headphones

Place the QCY T11 S headphones into the charging case and close the lid. The headphones will automatically turn off and begin charging.

Charging the headphone case

Connect the charger to the USB connector of the case. While charging, the case's LED will light red. When charging is complete, the indicator will turn green.

Charging time for the headphones is about 90 minutes.

Before using the QCY T11S headphones for the first time, you need to fully charge them. If the headphones are not used for more than two weeks, they should be charged periodically. Use chargers from a qualified manufacturer.

Read in full: Instructions for using Bluetooth headphones QCY T11 S. How to use, characteristics...

Charging QCY T8 headphones

Charging the headphones

Place the QCY T8 earbuds into the charging case and close the lid. The headphones will automatically turn off and begin charging.

Charging the headphone case

Connect the charger to the QCY T8 headphone case. During charging, the case indicator will light red. Once charging is complete, the indicator will turn green.

Read in full: Instructions for using QCY T8 TWS Bluetooth headphones. Reset settings, connect to phone...

Instructions in Russian for connecting QCY T1 to the phone

Follow these steps to pair your QCY headset with your phone.

Insert both QCY T1 earbuds into the charging case to activate the earbuds;

Insert the headset into the charging box
Then remove them from the case and they will automatically turn on and pair with each other. The right “main” earphone will automatically switch to pairing mode, which will be indicated by the indicator on the left earbud turning off;
Turn on your mobile phone and activate the Bluetooth connection on it (you can see how to do this in the smartphone’s operating manual in Russian); Activate Bluetooth connection
Searching for available Bluetooth devices to pair with your phone can be done by pressing Search or a similar option on your phone;
Find the QCY-T1_R headphones in the list of available devices and click on it, which will allow you to connect both headphones to your gadget. The headset will be connected to your device

How to charge QCY T5 TWS wireless bluetooth headphones

How to charge QCY T5 headphones

When the QCY T5 headphones run out of power, place them in the case to recharge them. The headphone indicators will glow red while charging, then turn white for 10 seconds when charging is complete.

Charging the case

Step 1. Place the headphones in the case.

Step 2: Charge the case using the Micro USB cable.

How to check the charge level of QCY T5 headphones

The QCY T5 headphones are fully charged: the indicator light turns green and goes off after one minute. The QCY T5 headphone case is fully charged: the indicator lights up green and goes out after one minute.

Read in full: Instructions for using QCY T5 Bluetooth headphones. How to reset settings, charging...

Design and build quality

For such a price, the QCY T1C headphones look decent, although the materials used here are inexpensive. The body of the gadget itself and the case consists of matte black plastic.

Inside the case, the headphones sit tightly, as there are magnets installed in it that will not allow the earbuds to fall out. QCY T1C headphones with a simple design: smooth body lines, manufacturer logo, two-color LEDs and a button on each earbud. The case has an indicator indicating the charge level. QCY QS1 T1C are available in a single color – black.

The xiaomi qcy t1c wireless headphones are made in such a way that they “sit” well, and due to their light weight they are almost not felt. With them you can move freely, twist and shake your head, run or do active sports, listen to music while training.

Charging headphones (QCY T1 Pro TWS)

When the battery level is low, the device emits a characteristic sound signal.

During charging, the indicator lights up red. Once the device is fully charged, the indicator turns blue.

Insert the headphones into the case (the spring-loaded contacts must be seated properly).

Read in full: Instructions for using QCY T1 Pro TWS wireless headphones. How to take on challenges, characteristics...

How to connect and use

For those interested in initial synchronization with a Qcy T1c earphone smartphone, here are instructions to help. The sequence of actions for synchronizing devices is simple:

Make sure that the battery charge level is sufficient for both plugs to operate. If necessary, charge the wireless headphones in the case.
Take the right “ear” out of the box - this is the leading element in the pair. Turn on by holding the button on the case for 1 second. The LED should blink to indicate it is ready to pair.
On your smartphone, activate Bluetooth wireless mode.
Wait until the search is completed, and the mnemonic QCY-T1_R will be displayed on the mobile phone screen in the list of devices available for connection. Initiate connection to your phone by tapping on the appropriate button.
Remove the second earphone from the case and turn on. In a few seconds, the elements will synchronize with each other and will be ready to play music.

After these manipulations, in the future, in order to connect both headphones to the sound source, you just need to remove them from the charging box and activate them. The gadget will automatically disconnect from the smartphone if you deactivate it and put the earplugs back into the case.

Controlling the headphones is quite simple. All manipulations are performed using mechanical buttons on the body of one and the other “ear”. To activate a switched-off plug, the button should be held for 1 second, and to turn off a working element, the button should be held for 3 seconds.

To pause/resume sound playback, you need to press the button once on any headphone. A double tap on the right control element switches to the next track, a similar action on the left element switches to the previous track. To receive an incoming call, you need to press the button of any of the “ears” once.

On a note. The gadget comes with instructions in Russian. Do not neglect the manufacturer’s recommendations - before starting operation, read the useful documentation.