How to increase bass in headphones - 4 ways (PC and phone). How to reduce bass in headphones

Low frequencies in the overall sound balance create vivid sensations that cause internal vibrations in the body and a feeling of inspiration. Strong bass is especially important for connoisseurs of modern music of various genres, including electronic music. There are a few simple tricks that will allow you to fully unleash the bass in musical works and help you fully utilize the potential of your headphones.

Recommendations: 6 best headphones with good bass

, How to make the sound in headphones louder: on a computer and phone

How to improve sound quality in headphones

Ergonomics

FiiO FA7 - in-ear headphones. They are inserted deep into the lower cavity of the auricle and completely block the passage of the ear canal. If you've never worn one, try it on before purchasing. And if you've owned earplugs before, the FA7 is probably a good fit, especially given the different earcup sizes.

Elastic memory foam ear tips help keep the headphones in place. Wearing the FA7 somehow won’t work and there’s no need for it: without additional fastening, the weight of the cable will cause the headphones to fall out.

How headphone fittings affect sound

Most of the headphones we've heard are dynamic—they're designed just like speaker speakers, but smaller in size. Loudspeakers can reproduce a wide frequency range, but are prone to distortion. This is why, for example, stage musicians use more reliable amplification devices such as monitor headphones.

In the center of the reinforcement emitters there is a U-shaped movable ferromagnetic armature that acts on the membrane. The influence of the membrane here is minimal: the sound is more precise and nuanced than that of dynamic drivers. The main disadvantage is the poor frequency range of such emitters. FiiO effectively combats this disadvantage: for example, the FA1 uses a full-range driver, while the FH5 uses an additional speaker for bass delivery.

FA7 succeeded only with “fittings” operating in different ranges. Each earphone has four Knowles drivers: CI - 22955 for low frequencies, ED - 29689 for mid frequencies and two SWFK - 31736 per ear for high frequencies. The built-in crossover is responsible for matching the drivers: the output should be a balanced sound with a high frequency potential (stated frequency response 20-40,000 Hz).

What does the Hi‑Res Audio certificate provide?

FA7 comply with the Hi-Res Audio standard. This means that the headphones support audio files with bit depths and higher-than-standard sampling rates at 16-bit and 44,100 Hz, and can also reproduce frequencies above 20,000 Hz. This is theoretical.

In fact, even lossless tracks can have a sample rate of 44,100 Hz and that's enough. Also, a person does not need sound with frequencies above 20,000 Hz. Above this threshold there is ultrasound, which we cannot hear. Therefore, the Hi-Res Audio brand is, rather, just a notice that we have serious headphones that need an appropriate source and music with a high bitrate.

We used the FiiO FA7 with a MacBook Pro without external DACs or amplifiers and a FiiO M7 Hi-Res audio player. Consequently, music: in the first case, these are tracks from streaming services, in the second - FLAC audio.

What sound frequencies are responsible for bass?

As you can see from the table, we are interested in sound frequencies from 20 to 160 Hz, depending on what kind of bass annoys you and what frequencies you want to lower.

Now that we know what sound frequencies we need to reduce so that there is less bass in the sound, we need to figure out the methods by which we can do this in Windows.

How to reduce bass in headphones using third-party Equalizer APO program for Windows

There are several third-party Windows programs that can help you reduce the amount of bass in your headphones. For example, you can use the Equalizer APO program.

You can download Equalizer APO here. This program is free and safe for your computer, but only if you download it from this link.

1. Download the program, install it on your computer and run.
2. After launch, find the “Configurator” window and in it select the device that currently outputs sound. It is usually called "Speakers". Then click the “Ok” button.
3. The program will ask you to restart your computer, do so. A reboot is needed so that the program begins to intercept the signal from your audio device and can reduce the bass in the headphones.
4. After restarting the computer, click on the “Start” button, in the window that appears, find “Search” and enter the phrase “configuration editor” into it. The Start menu will find this program, run it.
5. After launching the configurator, find the “Equalizer APO” tab there - this is an equalizer. Now you can customize the sound in it the way you want. Look at the table at the beginning of the article, determine those frequencies responsible for the bass that you most dislike in the sound and reduce them in the equalizer. Customize the sound to your liking.
6. That's it, now Equalizer APO will apply your equalizer settings to all the sound you hear, no matter what program generates them, be it a game, voice chat or Windows sound.

Warming up the headphones

Not all music lovers know about this method of increasing bass and the quality of the music being played. The essence of the procedure comes down to operating the accessory at maximum volume for a certain time. However, this process has its own characteristic features, without taking them into account, the headphones can simply be ruined.

The signal from the device is sent to a special membrane, which emits corresponding vibrations. They are then processed and converted into sound from the speakers.

Membranes are made of thin and elastic, but at the same time hard materials, which are recommended to be developed. Warming up serves precisely this purpose.

Special sounds are used: “pink noise” warms up efficiently and safely, using all sound frequencies of different amplitudes. The volume is set to maximum or close to maximum.

Of course, you can warm up with regular music, but then the volume needs to be increased gradually and dynamic tracks turned on. But in this case, you will have to wait a long time for the sound to be balanced; it is better to download pink noise online.

Speaking about the duration of warm-up, it depends on the area of ​​the membrane and the quality of the sound-reproducing equipment. It is believed that the usual earbuds need to be developed for 12 hours, of average quality – up to a day. Expensive full-size models include 48 hours, and sometimes more.

But after this procedure you can expect truly high-quality sound and deep bass; Even a layman will notice the difference.

However, not all types of models require warming up:

• the procedure is necessary for dynamic headphones;
• but is meaningless on reinforcement models. A different technology is used here, and the sound itself is different. There is simply nothing to develop.

After warming up, the headphones need to be used. If the developed model is not touched for a long time (a couple of weeks), the sound will change and become worse. You will have to warm up again, but in less time - 40-60 minutes.

Setting up bass in your home theater

Usually people want to add bass to the sound of their headphones, but sometimes they need to do the opposite - reduce the amount of bass in their headphones. Such a need may arise when you bought headphones with powerful bass, but it turned out to be too rollicking and even to you, a lover of low-frequency massage, it seems unnecessary. So is it possible in Windows to reduce the bass in headphones once and for all, and in all programs at once, and not just in the music player? How to increase bass on your phone and computer on Windows OS Instructions. As you can see from the table, we are interested in sound frequencies from 20 to Hz, depending on what kind of bass annoys you and what frequencies you want to lower.

Bass Booster - Bass Boost

An equalizer is a mechanical or software tone block that is responsible for regulating the power supply of sound frequencies depending on the bands. In fact, it is an instrument that adjusts the balance between mid, high and low frequencies. This is justified, since most system sounds do not require amplification of the upper or lower range, and it also protects the speaker from flying out of the embrasure when amplifying the lower range. On the other hand, precisely because of this, the output sound is somewhat dull and monotonous. Therefore, if you want to get a more balanced sound, which was originally intended by the sound director, then you will need one of the following:

How to increase bass in Windows 10

And now the time has come to talk about those frequencies of the sound range, which have become a real fetish among modern music lovers. We will talk about bass, as you may have already guessed, but not in general terms, but mainly in the plane of personal audio systems. In this article, you will learn the consequences of addiction to bass and why headphone users are at risk of becoming bass addicts. An addiction to low frequencies is something like a drug addiction: it’s quite easy to get hooked on bass, but returning to normal life without daily use of headphones will not be easy. And if with ordinary home speaker systems or car sound everything is clear.

How to reduce bass in Windows using standard tools

Most of you have a computer with a sound card built into the motherboard with a codec from Realtek. This is not necessarily true, but in most cases this statement is true.

You can reduce the bass in your headphones using Windows tools.

Go to the Realtek sound settings menu

Now find the equalizer settings. In the screenshot above I showed only an approximate appearance of which tab the equalizer is located in and what it looks like. I don’t have a computer with such a built-in sound card, so I can’t personally take the required screenshot, and it’s not necessary.

The main thing here is how to now adjust the equalizer so that the bass in the headphones decreases. We are interested in the three left sliders; they regulate the frequencies that we perceive as bass. Start moving them down slightly until the sound in the headphones seems acceptable to you. Experiment; you may not need to adjust all three sliders. The degree to which the bass volume will be reduced will depend only on your hearing and headphones, so I cannot give more precise data on the settings.

In the screenshot above, the environment and loudness are also selected. In your case, you do not need to select them; they should be turned off. All other equalizer sliders, except the three leftmost ones, do not need to be touched; they regulate other sound frequencies. If you want, they can be adjusted, but only after you have tuned the bass the way you need it.

Equalizer: add bass (low frequencies) when listening to music on iPhone and iPad

Usually people want to add bass to the sound of their headphones, but sometimes they need to do the opposite - reduce the amount of bass in their headphones. Such a need may arise when you bought headphones with powerful bass, but it turned out to be too rollicking and even to you, a lover of low-frequency massage, it seems unnecessary. So is it possible in Windows to reduce the bass in headphones once and for all, and in all programs at once, and not just in the music player? As you can see from the table, we are interested in sound frequencies from 20 to Hz, depending on what kind of bass annoys you and what frequencies you want to lower.

How to set the equalizer correctly - perfect sound

As we know, the perception of audio is very, very individual, and in principle there cannot be a sound that suits everyone absolutely. And if some people have enough of the same low bass frequencies that are played along with other frequencies in headphones or speakers, then others experience obvious discomfort from weak bass. Undoubtedly, the sound can be adjusted by using the equalizer in the player program through which the composition itself is played. But what to do if, for example, audio is listened to in streaming mode, directly through the site. After all, in this case, no tools are offered that could improve the sound or add the same bass. Luckily, Windows 10 boosts bass at the system level. The entire procedure is carried out in the corresponding settings section. The playback devices will be listed in the open window. You need to select by clicking the mouse the device for which you need to enhance the bass. Next, click the Properties button, which is located at the bottom of this window.