How to Connect Wireless Headphones to iPhone via Bluetooth?

Today we’re talking about how to connect wireless headphones to an Apple iPhone via Bluetooth and configure their operation. Since the latest iPhones have removed the audio jack, in order not to buy an expensive adapter, it is advisable to take a step towards wireless technologies and switch to Bluetooth TWS headphones. However, you don’t have to buy expensive original Apple Airpods. All iPhones - 5s, 6, 7, 8, Plus, SE, XS, XR, 11 and 11 Pro Max - will fit any inexpensive wireless headphones or headsets from AliExpress - Xiaomi, QCY, Awei, Blitzwolf, Hoco, Haylou, Havit and etc.

Connecting wireless TWS headphones to an iPhone via Bluetooth

The process of connecting bluetooth headphones to an Apple iPhone comes down to a few simple steps. It doesn’t matter what form factor they have - earbuds or in-ear plugs.

We take the headphones out of the case and turn them on if necessary.
We wait until they connect to each other or do it manually by briefly pressing the function button on each earphone.
Turn on Bluetooth on your iPhone and go to its settings
We are looking for our headphones by name among the available devices for connecting
Click on them and wait for connection

Connection order: where to start and what settings are needed

Before you connect wireless headphones to your iPhone, iPad or iPod Touch, you will have to understand the instructions included with the audio equipment. Manufacturers describe in detail some features related to connection, specifications, or buttons available on the case to activate certain functions.

As a rule, it describes how to turn on the headphones, as well as actions that need to be dealt with before pairing with mobile equipment. Often you have to either press the buttons on the headphone body or sharply click the volume keys.

After preliminary preparation, all that remains is to repeat the following algorithm:

Open “Settings” and go to Bluetooth.
At the top of the interface, move the slider to the active (green) position.
Wait until the Other Devices list contains entries that you can interact with. It’s worth searching by name, at least somehow related to the manufacturer of wired headphones or the model you have on hand.

The last step is to click on the entry, wait from 5 to 15 seconds until the “Connected” status appears. Bluetooth technology is completely ready for use.

If you don't see your headphones in the list, try turning them on. Also, on some models you also need to additionally hold down the “Bluetooth” button, which allows you to pair devices.

How to connect iPhone headphones to each other?

A few words about synchronizing wireless headphones with each other. Today, all modern models are paired with each other from the factory, so there is no need to do this manually. However, if you come across a previous generation model, you must first connect them together. To do this, simply press the button on each headphone once.

What is your opinion: is WiFi harmful?

Yes

22.92%

77.08%

Voted: 36521

The same goes for inclusion. Most wireless headphones turn on immediately as soon as they are taken out of the case. But some require separate activation - this is done in the same way by pressing a button. That is, to connect them to an iPhone or any other Android phone, you must first press it to turn it on. And then again to make them friends with each other. But such cases are becoming increasingly rare. Most often, they turn on and connect to each other automatically.

Possible connection problems

If the connection is not established, check whether the device is paired with another phone or device. If yes, then disconnect and try again.
Make sure the Bluetooth button is turned on on the Bluetooth device.
Check the battery charge level again.
Remove the device and add it again in the Bluetooth - found gadgets settings.
If the headphones or speaker are not visible at all. Then most likely the device is simply not supported by the iPhone and nothing can be done.
It would be a good idea to check if the headset works with other phones.

Important! There is no point in rebooting the iPhone, you will simply delete all the data, and this will not solve the problem. If the gadget is not visible at all, but other smartphones recognize everything perfectly, then there is simply no support, you need to look at another option.

Finally

This way you can connect any wireless headsets to your iPhone. These can be overhead or plug-in options, from Xiaomi, Samsung, Honor or others.

tell friends

Related posts How to connect wireless headphones to a Samsung phone

How to connect wireless headphones to an Honor and Huawei phone

How to connect wireless headphones to your phone

Headphones do not connect to the phone: why and what to do

Comments - 0:

What if iPhone doesn't see Bluetooth headphones or won't connect?

Since wireless headphones operate via Bluetooth, it is still less reliable than a wired connection. Therefore, there are various errors. For example, when the Apple iPhone does not see them. Here I can advise you to perform the following set of steps:

Bring them closer to the iPhone. We must remember that the maximum reception radius of Bluetooth 5.0 is up to 10 meters. In version 4.2 it is even smaller.
Turn off WiFi on iPhone. Since wireless headphones use TWS technology, an extra signal source may interfere with their connection.
Turn off the headphones and turn them on again
Deactivate and re-enable Bluetooth model on iPhone
Reboot phone
Perform a full factory reset of the headphones

If the iPhone sees them, but does not connect, then deleting them from memory and reconnecting usually helps. To do this, click on the “i” icon next to the name of your wireless headphones in the Bluetooth settings and select “Forget this device”

Then you can connect to the iPhone from the very beginning.

How to turn on wired headphones on iPhone

The phone does not recognize Android headphones - what to do, how to get the sound back

You can easily use a headset from an iPhone on an iPad or iPod touch. If these are wired headphones with a 3.5 mm jack, you just need to insert it all the way into the corresponding jack on the phone. This should be done as carefully as possible, without connecting the accessory abruptly, moving it to the sides. If everything is done correctly, an icon will appear on the display, symbolizing that all contacts in the socket are closed and the headphones are successfully connected.

On iPhone 7 Plus the jet connector is at the bottom.

Note! You can perform all these actions with other accessories with a 3.5 mm audio jet, but you need to remember that there is no point in connecting headphones with an impedance of more than 32 Ohms. The power of the phone and the battery are not enough to produce the same high-quality sound that they are capable of when connected to a computer or laptop.

Disconnect Bluetooth headphones from iPhone

It's a good idea to turn off your headphones when you're done using them to conserve battery life on both devices. There are two ways to do this:

Turn off the headphones or disable the pairing function on them;
Swipe up on the screen to open Control Center and tap the Bluetooth icon to turn it off;
If you need to keep the wireless connection enabled, go to Settings > Bluetooth, find your headphones in the connected devices section and turn them off with a simple tap of your finger.

One iPhone earphone stopped working: what to do?

Unfortunately, the quality of Apple headphones leaves much to be desired. AirPods, of course, moved the company forward in this regard. But after using them constantly for a couple of months, they also often fail. The most surprising thing is that most often it is one earphone that breaks, and it is the right one, which contains the microphone and the volume or video recording switch.

It would seem that you will have to buy a new accessory or use it on one ear, but there is one catch. All sounds on the phone are played in stereo mode: the song is divided into left and right channels. One can hear a voice, and the other, for example, the sounds of individual musical instruments. That is why when listening on one ear it is not always possible to enjoy the sound quality.

AirPods may not be supported by older versions of iPhone

The solution to the problem is unique, since it does not force the second earphone to work. The point is to set the sounds to play only in mono mode. It uses only one channel, and all components pass through it into one ear. To switch to mono, you need to go to your phone settings, find “Universal Access” and switch the desired option.

How to connect bluetooth?

All iPhone models are synchronized with gadgets that have a Bluetooth version of at least 2.1.

When buying wireless headphones, you should keep in mind that in order to connect and work together with Apple phones, they must support at least one of the following Bluetooth profiles:

Human Interface Device Profile (HID).
Audio/Video Remote Control (AVRCP).
Personal Area Network Profile (PAN).
Advanced Audio Distribution Profile (A2DP).
Hands-Free Profile (HFP 1.5).
Phone Book Access Profile (PBAP).

How to use Huawei FreeBuds Pro headphones

Volume adjustment

Volume up/down: Swipe the stem of any earphone.

Challenges

Answer/end a call: Squeeze the stem of either earbud once. Reject a call: Squeeze twice.

Playing music

Play/pause playback: Squeeze the stem of either earphone once. Next composition: squeeze twice. Previous composition: squeeze twice.

Noise reduction mode

To select noise reduction mode, press and hold the stem of the Huawei FreeBuds Pro.

See more about Huawei FreeBuds Pro (cost, reviews, characteristics, buy):

▶ View on Aliexpress…

▶ Look at Yandex.Market…

How to fix the problem

If, after connecting the headset, the iPhone continues to play sound through the speakers, do not panic and call the service center, much less run to the store for a new set of headphones. It is advisable to independently understand the causes of the problem and try to solve it. The detailed instructions below will be a good help.

Change system language

The simplest and most accessible method to restore iPhone operation in connected headset mode is to change the language settings. If the default system language is Russian, you should replace it with another one, and then reboot the device. You can do this as follows.

Enter the menu and select “Settings”.
In the section, find the “Basic” item.
Scroll down the screen and select “Language and Region”.
On the tab that opens, click on “Language (device name)” or “iPhone language”.
Choose any other language, for example. English, and click on the “Done” button.
In the notification request that appears on the screen, confirm the action.

If everything was done correctly, the connected headphones should work. Then all that remains is to return to the previous language (Russian) and enjoy listening to your favorite music.

Check iPhone settings

To make sure both devices are working, it's worth taking a look at the menu and checking if the phone call feature is enabled. The default mode should be set to automatic. You can check this as follows.

Open the “Settings” section.
Go to the “Basic” category.
Scroll down the screen and find "Accessibility".
Open the tab, find the line “Sound source” and click on it.
On the next page, select the “Automatic” option by checking the box next to it.

Clean the connector

Long-term use or incorrect use of a mobile device can lead to problems such as damage to the headphone jack. Since the hole where the plug is inserted is in an open state, microscopic particles of dust and moisture can get inside, as a result of which it can simply oxidize. It is recommended to clean the connector regularly, but if the moment is missed, you can use the following methods.

Take a dry ear cleaner (you can soak it in a small amount of alcohol) and carefully wipe the inside surface of the hole. An alternative option is to make a cotton swab from a toothpick or a thick needle. If you don’t have either one or the other at hand, you can twist a cotton strand and clean the connector.
Another option is to blow out the hole. This can be done using a vacuum cleaner or a can of compressed air, which is designed specifically for cleaning electronics.
Another way is to insert and remove the headphone plug from the phone several times in a row. Since the jack fits tightly into the hole, this procedure will allow it to be cleaned.

Regardless of which option is preferable, the procedure should be performed carefully and carefully so as not to damage the socket.

Reset settings

If after checking it turns out that the headphones are working properly, but there is still no sound, it is often enough to restart the Apple device with the headset connected to it. If the method does not work, you should try resetting the settings. There are two ways to do this.

Reset via settings menu

To reset your iPhone you will need:

Enter the “Settings” section.
From the list of available functions, select “Basic” and click on the line.
On the page that opens, select the “Reset” tab and expand it.
In the list of available operations, launch the “Reset all settings” function.
After this, you should restart the gadget.

This method helps to get rid of such problems as the appearance of a black screen on the iPhone and lack of information about incoming calls.

Reset in recovery mode

This option involves returning the settings to factory defaults via Recovery Mode and a computer with iTunes installed. This scenario is implemented in accordance with the following algorithm.

Connect iPhone to PC using a USB cable.
Launch iTunes and wait for it to sync with your phone.
Perform a reset by simultaneously pressing the “Power” and “Home” buttons.
When the program prompts you to restore or reset the device, you should select the first option.

Now we just have to wait. For now, the device will return to its original settings.

Reset settings

If the headphones are working properly, and this can be easily checked by connecting to another transmitting device, then you need to restart the iPhone itself.

If this does not help, then you should return to factory settings.

Since this operation destroys installed applications, as well as data stored on the device (music and photos), it is necessary to create a backup copy.

You can do this in two ways:

1. On the iPhone itself:

in the “Settings” section select iCloud;
in the window that opens, click on the line “Backup”;
the page that appears will show the date of the last reservation, so click on the “Create a backup” line to save the current data.

2. Using PC:

The iPhone is connected to the computer using a cable;
in iTunes, click on the iPhone icon;
follow the prompts on the screen to make a backup.

Only after making sure that the backup copy has been created, reset the settings to factory settings:

in the “Settings” menu, select the “General” column;
on the page that appears, click on the “Reset” item;
click on the line “Erase content and settings”;
After entering Apple AD and password, it will be reset to factory settings.

Connecting Bluetooth headphones to your iPhone

Start by placing the connected devices next to each other. The operating diameter of Bluetooth is only a few meters, so devices that are too far from each other will not connect.
Then start the headphones you want to connect to your phone in discovery mode. This allows the smartphone to see the headset and connect to it.
Open Settings.
Click "General" (if you're on iOS 7 or higher, skip this step and go to step 5).
Open Bluetooth.
Turn on Bluetooth, after which a list of all available devices will appear.
Find the headphones you want to connect with in the list and tap to select them.

Apple's official guide to pairing devices >

How to reboot Huawei wireless headphones?

With the earbuds in the charging case and the case open, press and hold the button for more than 10 seconds. The headphones will be restored to factory settings and pairing records will be deleted. The light inside the case will flash red while the headphones are being reset to factory settings.

Interesting materials:

How to recover WhatsApp messages on your phone? How to restore old contacts on your phone? How to recover deleted photos on your phone? How to recover deleted contacts on your phone? How to restore your phone book via Google account? How to recover phone book from Google? How to restore the phone book on Android? How to restore the phone book on Huawei? How to restore the phone book on Lenovo? How to restore the phone book after a factory reset?

Which wireless headphones are suitable for iPhone?

With the iPhone 7, which came out back in 2016, Apple completely abandoned headphones with a standard jack. Previously, you could plug a 3.5 mm headset into this jack, then listen to music and charge your phone at the same time. Now this is impossible. The device can only be connected to a headset via the charging connector.

If the user does not have wireless headphones, then he can only listen to music through a wired headset. For this, there is a special adapter that simply and easily attaches to the phone. It allows you to use both charging and a connected headset. You can purchase it from the official Apple store.

A wireless headset is the easiest and simplest option to replace a wired one, and is also an excellent solution to the situation of simultaneously charging and listening to music. It works using a wired connection to the device. That is, the user can charge the device and listen to music at the same time, and only one connector will be occupied, which is used for charging.

Wireless headphones are useful because they can play non-stop. This also brings inconveniences, for example, they require regular recharging. The device is charged through the case, which also comes with the headset itself.

Apple has its own wireless headset - AirPods. They work well and fit all devices from the company. Some users do not want to use this headset. The reasons are as follows:

This headset has only two types: plug-in and tablet. Those users who cannot use this type of headphone simply cannot buy the company's branded products. However, in 2019, the company decided to eliminate this drawback, so a vacuum earphone was created;
The cost of the product is also high. The original device is more expensive, and the wireless set of headphones does not come with the phone. Therefore, users prefer other headphone manufacturers.

That is why the company makes it possible to use not only a branded headset, but also another one. JBL or TWS are often recommended. To do this, it must be equipped with a Bluetooth connection function. Thanks to this, you can use a cheaper option, with which the user will also not have problems during use.

Why can't my iPhone see headphones via Bluetooth?

Why the iPhone doesn’t see the SIM card - reasons

Even iPhones, which are the epitome of trouble-free and modern mobile technology, can have problems identifying headsets and other Bluetooth devices. The most common causes of the problem are:

violation of the software integrity of the firmware, physical damage to the motherboard and individual contacts of the wireless module;
various software failures due to both unexpected actions and updates;
conflicts between system and user applications.

Important! Installing software from unverified sources can not only cause operating system failure and software conflicts, but also cause complete or partial inoperability of the gadget.

The adapter must be plugged into the connector through which the iPhone is to be charged.

The correct operation of Bluetooth is also affected by increased temperature, moisture, voltage drops or surges in the home electrical network during charging.