Wireless headphones are one of the most convenient inventions of the 21st century, which solved the problem with laces constantly getting tangled in a pocket or backpack. Nowadays, those who want to constantly be in touch, listen to music and audiobooks on the road or while playing sports, choose from a wide range of Bluetooth headsets. And no matter what kind of devices you bought, connecting wireless headphones to your phone is not difficult; manufacturers have tried to make this process as intuitive as possible. But for a beginner, difficulties can be intimidating and even seem like signs of a breakdown. We tell you how to connect wireless headphones to a smartphone on Android or iPhone and present step-by-step instructions explaining all the technical difficulties.
Connecting to your phone via Bluetooth
The connection between the phone and the headset is ensured via Bluetooth, a wireless information transmission system. In standard bluetooth mode, the signal is transmitted over a distance of up to 20 meters. The latest technologies allow you to count on reliable reception over long distances.
It is recommended to connect wireless headphones in the following way:
| 1 | find the bluetooth connection button in the settings menu |
| 2 | activate it |
| 3 | pair the phone and the desired device (in some cases you will need to enter a password) |
How to connect wireless headphones to an Android phone
The connection procedure below is relevant for Samsung phones and most other analogues on Android.
- Go to settings.
- Select the “Bluetooth” or “Connections” menu.
- Activate wireless connection.
- Find available devices or create a new connection.
- Select headphones to connect (by name or digital designation).
For your information! To speed up the process, hold down the “Bluetooth” icon in the status bar, after which you can instantly access the required settings.
M&J Wireless Bluetooth In-Ear Headphones with Charging (2 Colors)
Seller's reliability: excellent!
Delivery within Russia: free!
Customer reviews:
Review #1: The headphones arrived safe and sound. Sounds good, everything works, thanks! The instructions are unclear, I hope to figure it out. I recommend the product and the seller!
Review No. 2: I think the product as a whole is not bad, everything is there, everything works, there is even a USB cable for charging. As for the instructions, they are also there, albeit in English. But there is a small “But”, the headphones themselves do not sound normal, there are no low frequencies as such, and for the money this is more than cool. Delivery is just lightning fast! From China to Ukraine + Kyiv region by courier home, arrived in 10 days! It took me a long time to decide whether to give 5 stars, and I took as a basis the fact that the headphones really cost a penny, + the fact that the delivery and the seller’s response were also fast, I firmly decided to give 5 because it is a very good value for money!
Connection rules without errors
Wireless headphones are not always capable of high-quality wireless communication. If you properly calibrate the headset, even on the most budget model you can get good voice and sound transmission. For stable operation you will need to perform a number of simple steps.
| 1 | Fully charge the wireless headphones and turn them on |
| 2 | Adjust the headphone volume and microphone volume |
| 3 | Connect headphones and phone via bluetooth |
| 4 | Assess the audibility of music and telephone conversation in headphones |
| 5 | If necessary, re-adjust the gadget volume |
| 6 | Save optimal settings if automatic synchronization is not provided |
Important! The instructions below contain general tips on how to connect wireless headphones to your phone quickly and correctly. Special applications have been developed for many devices. They allow you to fine-tune your wireless headset and smartphone.
Pairing Bluetooth headphones with iPhone
Connecting wireless headphones and Apple smartphones is no more difficult than connecting with devices running Android OS.
| In the quick settings menu you need to find the Bluetooth icon |
| Activate connection |
| Find the desired device in the list of available ones and click on the connect button. |
If the required headset is not displayed in the list of available devices, you need to do the following:
- Click on the “Add new device” button.
- If after this the gadget still does not appear in the list of available ones, reboot one or both devices.
- Repeat the steps of connecting and searching for available devices.
How to connect Honor wireless headphones to your phone
The specified headset is connected to phones such as Samsung, Huawei, Xiaomi in the following sequence.
| 1 | Find the power button on the headphones. Enable them |
| 2 | Long press the Power button to activate the Bluetooth headphones. A successful connection will be indicated by blinking LEDs - red and blue |
| 3 | Find the item in the phone settings - Bluetooth connection |
| 4 | Activate it |
| 5 | Click on the Bluetooth menu - a list of devices available for connection will appear |
| 6 | Find the desired device, click the “Connect” button |
| 7 | If the connection is successful, the red LED goes out and the blue signal stops blinking (depending on the headphone models). LED lights up continuously |
Important! If at the beginning of setup only the blue LED on the headphones lights up, they are not available for search, but will be connected to the device that was previously paired with the headphones.
How to connect JBL headphones to your phone
JBL Bluetooth headphones are connected according to the standard scheme:
- On your smartphone you need to open “Settings”.
- Select "Wireless Networks".
- Activate the Bluetooth module.
- Wait until the system finds devices available for connection.
- If the headphones have already been connected to the phone before, the connection will be automatic.
Wireless Bluetooth headphones for sports Teamyo (4 colors)
Seller's reliability: excellent!
Delivery within Russia: free!
Customer reviews:
Review #1: I ordered on November 18th and received it on December 27th. The order was not tracked. Put it in the mailbox. Thank you very much for an excellent product and relatively fast delivery. I recommend the store to everyone. The headphones are working. A charger is included. My husband turned on Bluetooth, and everything connected and started working. The headphones charged quickly. Less than an hour. I'm happy with the purchase.
Review #2: The headphones arrived in 1 month. to Samara. Cool, magnetic, the sound is very loud. We connected to Honor 9 Lite quickly. Let's see how much is enough. I recommend. Thanks to the seller.
Review #3: The headphones arrived, everything is in excellent condition. Charged quickly. I always train with them now. The delivery track was tracked. Everything is great. Thank you.
Connecting TWS IS series headphones
The instructions are relevant for modifications of TWS i11S, i7S, i12.
- Activate Bluetooth on headphones.
- On your phone, select the model by name and allow pairing.
- A flashing blue indicator will indicate a successful connection.
- If pairing fails, you should restart the headphones by pressing and holding the power button.
After turning it on again, you need to long press the button or touchpad of the headphones until the red and blue sensor flashes alternately.
Preparation before connection
Let's start with the general rules:
- The new headset must be recharged within 30-40 minutes, otherwise it will turn off at the time of pairing or after it.
- When connecting for the first time, the smartphone and headphones should be at a distance of 1-2 meters from each other.
- On full-size and overhead models, there may be a button to enable visibility in the Bluetooth range. Without activating it, you will not be able to find the device.
The intricacies of connection, pairing, and device detection are written in the proprietary instructions, which are placed in the box.
Connecting Sony headphones
Procedure for connecting Sony headsets to Xiaomi, Samsung, Huawei phones:
- If Bluetooth headphones are turned on, they need to be turned off.
- The pairing mode with the phone is activated on the headset.
- Press and hold the ID Set key.
- After the indicator starts flashing, the button is released. The headset enters connection mode with the priority device.
Important! Before you start combining wireless headphones and a phone with each other, you need to make sure that the headset is fully charged and the distance is at least one meter from the phone.
Step-by-step instructions for connecting a Bluetooth headset:
- Turn on TWS, AWEI, Meizu, Xiaomi, Huawei, Redmi or any brand headphones, then activate Bluetooth on your phone;
- Go to the Bluetooth settings on your smartphone, where you can see a list of all available devices within a 10-meter radius;
- Find the name of the headphones in the list and click on them. The smartphone will try to connect to them and will most likely ask you to enter a pairing code (in most cases - 0000). It can be found in the instructions for the headset;
- As soon as you enter the code, the Bluetooth pairing process will begin. If they have a light indicator, it will start flashing.
It happens that a case is included with the headphones. It may indicate the place where to place the phone for synchronization. This is necessary when connecting using NFC.
How to connect Redmi from Xiaomi to each other
The connection of these wireless headphones is carried out according to the following scheme:
- They cancel any interaction between the headset and other devices.
- The headphones are turned off by holding the power button for at least 5 seconds.
- After the red LED indicators light up, press both keys again for 15 seconds until the sensors begin to flash alternately red and white.
- Then hold down the power key again for a couple of seconds until the left element finds the right one, after which it synchronizes with it.
- Now you can connect the headset to your smartphone.
If the reset does not help, it is recommended to perform it again 2-3 times.
Possible problems
How to connect wireless headphones to your phone if problems and malfunctions occur in the paired devices. Here are the main possible problems and their solutions.
| Problem | Solution |
| The phone does not recognize the bluetooth headphones | Make sure devices are fully charged; reboot by holding the power button for at least five seconds; update the list of devices available for connection on your phone |
| Interaction problems after updating the phone OS (new driver versions conflict with the headset firmware) | Fix by returning to the previous OS version or installing updated firmware on wireless headphones |
| The Bluetooth signal on the phone is interrupted or connection is not possible | The reason is a mismatch between the Bluetooth versions on the phone and headphones. You need to contact a service center, or select headphones with a Bluetooth version that matches your phone |
Possible problems and solutions
Read more about what problems often arise when connecting gadgets to each other, and how to fix them.
Why can't my phone see my headphones?
Despite the presence of simple instructions, it is sometimes impossible to connect a smartphone with a headset, because... The phone simply does not see the bluetooth headphones. There are several reasons for this:
- large distance between devices. In order for devices to connect, they must be within 10 meters of each other. Moreover, there should be no wall or other barrier between them. Also, certain models of headphones connect to external devices only when in close proximity to them;
- headphones are turned off. Often users forget to turn on “ears”, which is why they do not appear in the list. Basically, this problem happens with models that do not have a light indication on the body to confirm whether the device is turned on or off;
- The battery is dead. Unfortunately, if there are no indicators on the body of the stereo device, then it may not notify you of the battery charge status. If there is an LED, but it does not light up, then the headphones are dead and they need to be connected to the power adapter via USB;
- The headset has a mysterious name. This problem is often encountered by users who purchased a budget headset from China. The Chinese give their devices the most unpredictable names, not only in English and Russian, but also using hieroglyphs. To find the model you need, you can do the following: turn off the headset and tap on the “Update” or “Search” button on your smartphone. The device that needs to be paired with the mobile phone will disappear from the new list;
- The headset has exited connection mode. Often, the connection mode works for a limited time (the first 30 seconds after switching on). If this time runs out, the device may no longer appear in the list.
If the phone still finds the headset, but its icon disappears from the connection control point after 3-4 seconds, then a small trick invented by forum users will help fix this problem. To do this, you need to place the headset in the ear not all the way and wait until the corresponding icon appears on the phone screen. Then, after 5-10 seconds, put the headset on all the way. This method is relevant for smartphones Samsung, Honor, Xiaomi Redmi, Nokia, Meizu and models of other brands.
Why doesn't the headset connect to my smartphone?
If the headphones do not connect to your phone via Bluetooth, although they appear on the screen, then they may already be connected to another device. If the device is paired with a tablet, laptop, TV or Windows computer, you will not be able to make an additional connection. To fix this, the user needs to find this very device, disconnect the connection with the headset through it, then connect the latter to the phone.
If this does not help, it is recommended to remove all devices that support wireless technology from the headphones (as they create interference) and repeat the procedure.
It happens that after pressing the connect button, the system crashes. In this case, you need to tap on the “Disconnect connection” sign, and then restart the phone and try pairing again.
The next reason why wireless headphones do not connect to the phone via Bluetooth is simple incompatibility. Bluetooth technology is backward compatible. For example, an iPhone 4 that has Bluetooth 2.1 installed cannot be paired with a device with Bluetooth 4.2 and 5.0. Therefore, before connecting, you need to make sure that your smartphone has a newer version of Bluetooth than the headset. You can check this information on the manufacturer's website.
If the power saving mode is activated on the smartphone, the user is unlikely to be able to use Bluetooth. To turn off the energy saving mode, you need to go to the gadget settings, open the “Battery” section and in the corresponding item move the slider to the inactive position.
If the user has followed all the recommendations correctly, but still fails to connect the smartphone to the headset, the problem may be a physical breakdown of the Bluetooth module on the phone or a malfunction of the headphones themselves. To check if the headphones work, you need to connect them to another gadget.
Only 1 bluetooth earphone is connected to the phone
It often happens that only one wireless earphone is connected to the phone, while the second one remains inactive. The algorithm for correcting problems depends on what brand the headset belongs to.
AirPods not working
If 1 AirPods earphone does not work, you can solve this using the following manipulations:
- Reset AirPods. To do this, you need to open the settings, go to the Bluetooth option and next to the name of the headphones, tap on the i button, now select “Forget this device”. Next, the headphones are placed in the case for 1-2 minutes, then the case is opened and connected to the iPhone again.
- Checking the volume balance. It is possible that when connecting to a smartphone, the user shifted the volume balance to the left or right side, and this resulted in no sound on one earphone.
- Firmware update. For example, AirPods Pro 2 work normally with smartphones running iOS 12 and later. Accordingly, if the phone has an outdated firmware version, this may lead to incorrect operation of the headset. To update the OS, you need to go into the settings and tap on the corresponding notification.
- Cleaning from dust. If the headphones are not new, they may have become clogged with dust during use.
Often, problems can be fixed after resetting the headphones. If the recommendations described above did not help, then 1 earphone is probably broken.
One earphone of another brand does not function
For headphones of all other brands (including Honor FlyPods, Freedconn, JABRA, Morningstar, as well as Partner, Panasonic, Remax, Zhabra and Asus), the algorithm of actions is different. To fix problems, you should follow each of the recommendations in turn:
- Disconnect the devices and reconnect them to each other.
- If the headset continues to connect to the smartphone, but 1 earphone does not start working, then dust has accumulated inside it. You should carefully clean the microphone and speaker of the damaged earphone, then blow them out.
- The cause of the problem may also be outdated firmware of the phone. To fix this, you need to go into your smartphone's settings and install the update (if available).
As a rule, after these manipulations the problem disappears. If the earphone still does not work, then the headset is taken to a service center.
No sound after updating smartphone
If after installing the update there is no sound in the headphones, then the first thing you need to do is check the settings for your smartphone. To do this, the user needs to go to settings and make sure that the “for music” and “for conversation” profiles are active.
If the problem persists, rebooting the smartphone and the headphones themselves will help. You should also make sure that both devices have enough power to connect correctly (for example, on some smartphones, Bluetooth turns off automatically as soon as the charge reaches 5-10%).
If this does not help restore the sound on the headset, then all that remains is to “roll back” the smartphone to the previous version of the OS. This will also help if the sound has disappeared due to the installation of a third-party utility.
